User's Guide

Page 4
Back to Transceiver
Main Page
Rear Panel Power Switch
The rear panel's power switch is a 2-way rocker switch used to select between power on, and standby.
When the Power Switch is set to the Standby position, dangerous voltages are still present
in the transceiver's internal power supply circuitry. To ensure safe working, the transceiver
must be isolated from the ac and dc input supplies.
Table 2 Headset/Microphone/Diagnostics Connector - PC Connections
Pin
Number
Signal
Input or
Output
Description
2 Transmit data Output RS232, 115200 baud, 8 data bits, 1 stop bit, no parity, no
handshaking.
4 Receive data Input RS232, 115200 baud, 8 data bits, 1 stop bit, no parity, no
handshaking.
7 Ground - 0 V.
WARNING
Dangerous Voltages
= Standby= On