User's Guide

T6T VHF 50 W Transmitter Page 18 Operation
Back to Transmitter
Main Page
AM-MSK Mode Settings Procedure
During this procedure, the following parameters, applicable to AM MSK operation, can be set:
❑ RF power output
❑ Audio line input level
❑ Inhibit
❑ PTT on (key) or off (de-key)
❑ Transmitter time out
❑ Modulation depth
❑ Antenna c/o delay (on or off)
❑ Key priority (local or remote)
❑ Enable or disable remote PTT
❑ Enable or disable remote phantom PTT.
AM-MSK Mode Settings Screens
The AM-MSK mode setting screen is accessed from the Settings screen. Use the Scroll/Select switch to
select the parameter, then enter the required setting(s).
P o w e r 5 0 W
L i n e I n - 1 3 d B m
I n h i b i t O F F
E x i t > >
P T T O F F
T X T i m e o u t 1 8 0 s
M o d D e p t h 8 5 %
E x i t < < > >
A n t C / O D e l O N
K e y P r i o r i t y L - R
L o c a l P T T E N
E x i t < < > >
R e m o t e P T T E N
R e m P h a n P T T E N
B a c k
E x i t < <
Adjustments
RF power between 5 W to 50 W.
Audio line in level between -30 to +10 dBm.
On or Off.
On (key), Off (de-key).
2 to 510 s.
5 to 95%.
On or Off.
Local-remote or Remote-local.
Enabled or Disabled.
Enabled or Disabled.
Enabled or Disabled.