User's Guide

T6T VHF 50 W Transmitter Page 4 Operation

Back to Transmitter

Main Page

Rear Panel Power Switch

The rear panel's power switch is a 2-way rocker switch used to select between power on, and standby.

When the POWER SWITCH is set to the Standby position, dangerous voltages are still

present in the transmitter's internal power supply circuitry. To ensure safe working, the

transmitter must be isolated from the ac and dc input supplies.

Table 2 Microphone/Diagnostics Connector - PC Connections

Number

Signal Input or

Output

Description

2 Transmit data Output RS232, 115200 baud, 8 data bits, 1 stop bit, no parity, no

handshaking.

4 Receive data Input RS232, 115200 baud, 8 data bits, 1 stop bit, no parity, no

handshaking.

7 Ground - 0 V.

WARNING

Dangerous Voltages

= Standby= On