User's Manual Part 1
Table Of Contents
- Health and Safety
- Customer Support
- Abbreviations
- Overview
- Specification
- Operation
- Overview
- T6T VHF Amplifier
- Drive Assembly
- Setting Up and Operation
- Normal Operation
- Using the Scroll/Select Switch
- Screen Protocol
- Menu System
- Menu Lock Screen
- Control Screen
- Notes for Setting Up the Transmitter
- Changing the Transmitter’s Operating Frequency
- To Store and Recall Frequency Channels
- To Initiate a BIT Test
- Standby Mode
- Settings
- AM-Voice Settings Procedure
- AM-MSK Mode Settings Procedure
- Mode 2 Settings Screen
- Mode 3 Settings Screen
- Polarities Screen AM-Voice and AM-MSK
- Mode 2 and Mode 3 Polarity Settings
- AM-Voice and AM-MSK BIT Screen
- Mode 2 and Mode 3 BIT Screen
- Software Configuration Screens
- Band Edges
- BIT Status Warning Screens
- Installation
- Warnings and Cautions
- Introduction
- Installing the Transmitter
Page 7
Customer Support
Contacting Park Air
Customer support is available using email, telephone or fax. If you require help in configuring, installing
or maintaining equipment supplied by Park Air, use any of the contact methods listed below.
Email
Address: support@uk.parkairsystems.com
Telephone
During normal UK office hours: +44 1778 381557
Outside normal UK office hours: +44 7733 124457
Fax
Fax number: +44 1778 381556
Mail
Address: Customer Services Department
Park Air Systems
Northfields
Market Deeping
Peterborough PE6 8UE
England
Web Site
Web address: www.parkairsystems.com
Fault Reporting
To ensure that Park Air continues to offer the highest level of after sales service, it is necessary to gather
as much information as possible about equipment faults. If any equipment supplied by Park Air becomes
unserviceable, please complete a copy of the fault report shown on the next page, and return it to the
Customer Services department at Park Air.