User's Manual Part 1
Table Of Contents
- Health and Safety
- Customer Support
- Abbreviations
- Overview
- Specification
- Operation
- Overview
- T6T VHF Amplifier
- Drive Assembly
- Setting Up and Operation
- Normal Operation
- Using the Scroll/Select Switch
- Screen Protocol
- Menu System
- Menu Lock Screen
- Control Screen
- Notes for Setting Up the Transmitter
- Changing the Transmitter’s Operating Frequency
- To Store and Recall Frequency Channels
- To Initiate a BIT Test
- Standby Mode
- Settings
- AM-Voice Settings Procedure
- AM-MSK Mode Settings Procedure
- Mode 2 Settings Screen
- Mode 3 Settings Screen
- Polarities Screen AM-Voice and AM-MSK
- Mode 2 and Mode 3 Polarity Settings
- AM-Voice and AM-MSK BIT Screen
- Mode 2 and Mode 3 BIT Screen
- Software Configuration Screens
- Band Edges
- BIT Status Warning Screens
- Installation
- Warnings and Cautions
- Introduction
- Installing the Transmitter
T6T 300 Watt VHF Transmitter Page 63 Operation
Table 12 Functions and Parameters
Function Front
Panel
VFP MARC T6
Controller
T1/E1 HDLC Default Setting
FREQUENCY
Change frequency
✔✔✔ ✔ ✔✔ 118.000 MHz
FREQUENCY CHANNELS
Store/Recall preset
frequency channels
✔✔✔ ✔ ✗✗
-
SETTINGS
Set modulation
mode
✔✔✔ ✔ ✔✔ AM-Voice
Radio Settings (AM Modes)
Set RF output
power
✔✔✔ ✔ ✔✔
300 W
Set audio input line
level
✔✔✔ ✗ ✔✗
-13 dBm
Set inhibit on or off
✔✔✔ ✗ ✗✗
Off
PTT test facility
on (key), off (de-
key)
✔✔
View
state
✗✔✗ Off
Set Tx time out
✔✔✔ ✗ ✔✗
180 s
Set modulation
depth
✔✔✔ ✔ ✔✗
85%
Set mute on or off
(AM-Voice only)
✔✔✔ ✗ ✗✗
On
Set VOGAD on
or off
(AM-Voice only)
✔✔✔ ✗ ✗✗
On
Set antenna C/O
delay on or off
✔✔✔ ✗ ✗✗
AM-Voice - On
AM-MSK - Off
Set frequency offset
(AM-Voice only)
✔✔✔ ✗ ✗✗
0 (No offset)
Set frequency step
size
(AM-Voice only)
✔✔ ✗ ✗ ✗✗
25 kHz
Continued ...