User's Manual Part 1

T6T 300 Watt VHF Transmitter Page 49 Operation
AM-Voice Settings Procedure
During this procedure, the following parameters, applicable to AM-Voice operation, can be set:
❑ RF power output
❑ Audio line input level
❑ Inhibit (on or off)
❑ PTT on (key) or off (de-key)
❑ Transmitter time out
❑ Modulation depth
❑ Mute (on or off)
❑ VOGAD (on or off)
❑ Antenna change-over delay (on or off)
❑ Offset
❑ Step
❑ Mic (active or passive)
❑ Key priority (local or remote)
❑ Enable or disable local PTT
❑ Enable or disable remote PTT
❑ Enable or disable remote phantom PTT.
AM-Voice Mode Settings Screen
The AM-Voice mode setting screen is accessed from the Settings screen. Use the Scroll/Select switch
to select the parameter, then enter the required setting(s). Notes regarding optimum line levels are given
on page 42.
P o w e r 3 0 0 W
L i n e I n - 1 3 d B m
I n h i b i t O F F
E x i t > >
P T T O F F
T X T i m e o u t 1 8 0 s
M o d D e p t h 8 5 %
E x i t < < > >
M u t e O N
V O G A D O N
A n t C / O D e l O N
E x i t < < > >
Adjustments
RF power between 30 W and 300 W.
Audio line in level between -30 to +10 dBm.
On or Off.
On (key) or Off (de-key).
2 to 510 s or Off.
5 to 95%.
On or Off.
On or Off.
On or Off.