User's Manual Part 1

T6T 300 Watt VHF Transmitter Page 48 Operation
Table 8 Operational Settings from the Front Panel
Parameter Mode Adjustment Range Factory Default Setting Further
Reference
Menu lock screen All Locked or unlocked Unlocked page 40
Enter standby
mode
All Yes or No - page 46
Exit standby mode All Yes or No - page 46
Set mode of
operation
All AM-Voice, AM-MSK,
Mode 2 or Mode 3
AM-Voice page 47
Set polarities AM-Voice,
AM-MSK
STD or INV STD page 53
Band edges All 118.000 to 136.975 MHz 118.000 and 136.975 MHz page 61
LCD backlight All 15 to 120 s, On or Off 30 s page 47
RF power All 30 to 300 W (6 W steps) 300 W page 49 and
page 51
Audio line in level AM-Voice,
AM-MSK
-30 to +10 dBm -13 dBm page 49 and
page 51
Inhibit AM-Voice,
AM-MSK
On or Off Off page 49 and
page 51
PTT (key) AM-Voice,
AM-MSK
On (key) or Off (de-key) Off page 49 and
page 51
Tx time out AM-Voice,
AM-MSK
2 to 510 s or Off 180 s page 49 and
page 51
Modulation depth AM-Voice,
AM-MSK
5 to 95% 85% page 49 and
page 51
Mute AM-Voice On or Off On page 49
VOGAD AM-Voice On or Off On page 49
Antenna C/O delay AM-Voice
AM-MSK
On or Off
On or Off
On
Off
page 49
page 51
Offset AM-Voice 0, ±2.5, ±4, ±5, ±7.3, ±7.5
or ±8 kHz
0 (No offset) page 50
Step AM-Voice 8.33 kHz, 25 kHz or both 25 kHz page 50
Mic AM-Voice Active or Passive Passive page 50
Key priority AM-Voice,
AM-MSK
Local-Remote or
Remote-Local
Local-Remote page 50 and
page 51
Local PTT AM-Voice,
AM-MSK
Enabled or Disabled Enabled page 50 and
page 51
Remote PTT AM-Voice,
AM-MSK
Enabled or Disabled Enabled page 50 and
page 51
Remote phantom
PTT
AM-Voice,
AM-MSK
Enabled or Disabled Enabled page 50 and
page 51