User's Manual Part 1

Page 13
Table of Contents (continued)
Page
AM-MSK Mode Settings Procedure 51
AM-MSK Mode Settings Screen 51
Mode 2 Settings Screen 52
Mode 3 Settings Screen 52
Polarities Screen AM-Voice and AM-MSK 53
AM-Voice and AM-MSK Polarity Settings 53
Mode 2 and Mode 3 Polarity Settings 56
AM-Voice and AM-MSK BIT Screen 57
Mode 2 and Mode 3 BIT Screen 59
Software Configuration Screens 60
Band Edges 61
BIT Status Warning Screens 62
Installation 67
Warnings and Cautions 68
Introduction 69
Fuses and Connectors 70
Installing the Transmitter 71
Initial Inspection of the Transmitter 71
Fitting the Correct ac Input Fuses 71
Fitting the Drive Assembly and Amplifiers into an Equipment Cabinet 72
Connecting the Amplifiers to the Drive Assembly 73
Fitting and Connecting the Combiner 74
Fitting 74
Connecting 75
Connecting the Antenna 75
Connecting the Chassis Stud 77
Connecting the DC Input Supply 77
Connecting the AC Input Supply 78
Configuring the Transmitter for Operational Use 79
Front Panel Connectors 86
Microphone/Diagnostics Connector 86
Reference Connector 86
Rear Panel Connectors 87
MARC Connector 88
MARC Audio Connector 89
MARC Data Connector 91
T1/E1 Connector 92
HDLC Connector 93
External Speaker 94
Facilities Connector 95