User's Manual

T6T VHF 100 W Transmitter Page 16 Operation
Back to Transmitter
Main Page
Table 5 Operational Settings from the Front Panel
Parameter Mode Adjustment Range Factory Default Setting Further
Reference
Menu lock screen All Locked or unlocked Unlocked page 8
Enter standby
mode
All Yes or No - page 14
Exit standby mode All Yes or No - page 14
Set mode of
operation
All AM-Voice, AM-MSK, Mode
2 or Mode 3
AM-Voice page 15
Set polarities AM-Voice,
AM-MSK
STD or INV STD page 21
Band edges All 118.000 to 136.975 MHz 118.000 and 136.975 MHz page 29
LCD backlight All 15 to 120 s, On or Off 30 s page 15
RF power All 10 to 100 W 100 W page 17
Audio line in level AM-Voice,
AM-MSK
-30 to +10 dBm -13 dBm page 17 and
page 19
Inhibit AM-Voice,
AM-MSK
On or Off Off page 17 and
page 19
PTT (key) AM-Voice,
AM-MSK
On (key), Off (de-key) Off page 17 and
page 19
Tx time out AM-Voice,
AM-MSK
2 to 510 s or Off 180 s page 17 and
page 19
Modulation depth AM-Voice,
AM-MSK
5 to 95% 85% page 17 and
page 19
Mute AM-Voice On or Off On page 17
VOGAD AM-Voice On or Off On page 17
Antenna C/O delay AM-Voice
AM-MSK
On or Off On
Off
page 17
page 19
Offset AM-Voice 0, ±2.5, ±4, ±5, ±7.3, ±7.5,
±8 kHz
0 (No offset) page 18
Step AM-Voice 8.33 kHz, 25 kHz or both 25 kHz page 18
Mic AM-Voice Active or Passive Passive page 18
Key priority AM-Voice,
AM-MSK
Local-Remote or
Remote-Local
Local-Remote page 18 and
page 19
Local PTT AM-Voice,
AM-MSK
Enabled or Disabled Enabled page 18 and
page 19
Remote PTT AM-Voice,
AM-MSK
Enabled or Disabled Enabled page 18 and
page 19
Remote phantom
PTT
AM-Voice,
AM-MSK
Enabled or Disabled Enabled page 18 and
page 19