User's Manual

T6T VHF 100 W Transmitter Page 4 Operation
Back to Transmitter
Main Page
Rear Panel Power Switch
The rear panel power switch is a 2-way rocker switch used to select between power on, and standby.
When the Power switch is set to the Standby position, dangerous voltages are still present
in the transmitter's internal power supply circuitry. To ensure safe working, the transmitter
must be isolated from the ac and dc input supplies.
4 Receive data Input RS232, 115200 baud, 8 data bits, 1 stop bit, no parity, no
handshaking.
7 Ground - 0 V.
Table 2 Microphone/Diagnostics Connector - PC Connections
Pin
Number
Signal
Input or
Output
Description
WARNING
Dangerous Voltages
= Standby= On