Manual
PARDINI PISTOLS, GPE - SP - HP MODELS
FEATURES
These pistols have been designed for 25 metre shooting as follows:
The GPE model for the ISSF Rapid Fire Pistol match, evolved from
the Rail Shumann model' and fitted with an electronic trigger
mechanism.
The SP model for the ISSF. Standard Pistol match. The HP model for
the ISSF Center Fire Pistol and other Center Fire matches (CISM).
Interchangeable grips are made from one piece wainut blanks.
The operating system is a delayed blow-back type. The bolt (light
alloy for the GPE model and special steel for the SP an HP models)
closes slightly in front of the centre of gravity and is fitted with a free-
floating firing pin.
Cartridges are fed from a five shot magazine, located in front of the
trigger and held in place by a frame mounted magazine catch. The
ejector is built into the magazine and the extractor claw is mounted
on the right hand side of the bolt.
The angle of the magazine and follower plate is designed to give
perfect cartridge feeding into the chamber.
The trigger mechanism is contained in the rear of the pistol; in the
GPE models it is extractable and, in the SP and HP models, it is
directly into the frame.
Numerous features indicate the design quality of Pardini's pistols:
optimum and efficient design of the firing mechanism, the barrel axis
and line of sight are both extremely low, the inclination of the grip is
comfortable for the anatomy of the wrist and the coaxial movement
of the bolt in relation to the barrel are some of the most important
characteristics of Pardini's pistols.
The pistols are also equipped with a new dynamic multifunction
counter-weight (mod Heinrich Ries) that allows a reduction in recoil
and annuls any vibration of the front sight during firing. The counter-
weight can be personalised to the firer by inserting alternative weights.
The GPE model is flited with a new design of electronic trigger
incorporating an antishock mechanism that guarantees perfect
functionality during firing.
PISTOLES PARDINI, MODELE GPE - SP - HP
OONNES TECHINIQUES
Cettes armes sont concues pour Ie tir a 25 m. des disciplines UIT
La GPE pour la specialite ISSF pistolet automatique, evolution du
modele GPS prepare pas Ralf Shumann, dote d'une detente
electronique.
HP: Pistolet Sport Gros calibre et Vitesse olympique.
Les POIGNEES des trois armes sont interchangeables, taillees dans
Ie meilleur noyer et sans mecanique et I'interieur afin de faciliter les
adaptations personnelles des formes du bois.
Le principe de fonctionnemment est semi-automatique a culasse
mobile. La cuJasse est en alliage leger dans Ie modele GPE et en
acler special dans les modele SP et HP, Ie centre de gravite est
avance et Ie percuteur est flottant.
L'alimentation pour 5 coups est assuree par un chargeur mono-
carcasse place lateralement sous la culasse.
L'inclinaison particuliere du chargeur et un elevateur basculant
permettent Line presentation favorable des munitions tout a fait dans
I'axe de la chambre.
Le mecanisme de detente est entierement place dans la partie
posterieure des pistoJets: il est amovible sur Ie GPE et directement
goupille dans la carcasse sur les SP et HP.
De nombreux facteurs mettent en evidence un projet soigne des
pistolets Pardini:
La position extremement basse de "axe du canon et de la ligne de
mire, la pente de la crosse adaptee a I'anatomie du poignet, Ie
deplacement lineaire de la culasse dans I'axe du canon, sont quelques
caracteristiques des pistolets PARDINI.
lis sont egalement dotes de contrepoids dynamiques multifonction
d'un nouveau concept (mod. Heinrich Ries), loges a I'interieur et fournis
par la maison PARDINI, qui permettent de reduire Ie recul, d'annuler
les vibrations du guidon pendant Ie tir et de personnaliser
I'
equilibre
du pistolet.
.
Le modele GPE est dote de detente electronique de nouvelle conception,
avec un systeme antichoc pour la protection des composants interieurs qui
garanti la fiabilite maximum d'exercice.
"
"13