Product Instruction

ManualsBrandsPARD ManualsHunting & FishingDigital Night Vision

Notes

—3—

1.Don't look at the IR infrared light directly, or it will damage your eyes!

2.Massive power will be gathered when the infrared light is turned on. D

aim at flammable items at a close range, otherwise it may cause fire. Please turn the

infrared light off or enter sleep mode after use.

on't

3. Please use a rechargeable battery with a rated voltage of 3.7V!

4. Attempts to disassemble or repair the device without authorization will void

the warranty. Please contact with the maintenance point in time if there's any

needs.

—1—

Digital Night Vision

StandardVersion

—2—

RangefinderVersion

Digital Night Vision

PRODUCT INSTRUCTION

DS3

DS3-RF

Summary of content (8 pages)

PAGE 1
Digital Night Vision DS3 PRODUCT INSTRUCTION Standard Version —1— Digital Night Vision DS3-RF No t es 1.Don't look at the IR infrared light directly, or it will damage your eyes! 2.Massive power will be gathered when the infrared light is turned on. D on't aim at flammable items at a close range, otherwise it may cause fire. Please turn the infrared light off or enter sleep mode after use. 3. Please use a rechargeable battery with a rated voltage of 3.7V! 4.
PAGE 2
Lens cap LRF module (only for LRF version) Keyboard panel LRF / W iFi button Battery compartment cap Menu / OK button Play / Recording button Eyepiece dioptre adjustment ring Range emitter Range receiver Stretchable fill light Objective lens focusing ring Objective lens Power indicator —4— Mode switc button Power/Sleep button —5— Package Contents The packaging contains a night vision optics with the following: Type-C cable; Hex-nut wrenches; 18650 3.
PAGE 3
2.Adjustments 2.Sleep Mode： Rotate and adjust the eyepiece dioptre adjustment ring until you can see the four-character icon on the screen ( there's no need to see a clear image ), then rotate the Objective lens adjustment ring until you can see the target clearly. Next, switch to different modes, test IR, Red dot and Rangefinder to check the function of the device. 3. Mount Installation There are five mounting holes in the base of the device.
PAGE 4
>Reticle Adjustment 7>Default Color Enter the submenu reticle adjustment with a short press of OK button. Select options with a short press of OK button and adjust value with short press of +/- button. To confirm your setting by enter “Save” with a short press of “ + ” button or cancel with a short press of “ – ” button, then press OK button to confirm and exit. Enter the submenu Default Color with a short press of OK button.
PAGE 5
16>WiFi 19>Date/ Time Enter the submenu WiFi with a short press of OK button. Select"Off” or "On” with a short press of +/- button. Confirm your selection with a short press of OK button. Exit WiFi with a long press of “+” button. ( The Menu page can not be opened while WiFi is turned on ) The default user name and password of WiFi are PARD and 12345678. The corresponding APP is available on PARD official website(www.pard.com). Enter the submenu “Date/Time” with a short press of OK button.
PAGE 6
Specifications DS3 DS3-RF Ranging range 4.5x-9x/ 6.5x-13x IR wave length Model Magnifying power Warranty Card / 182*70*53.5 Dimension (mm) 3.5-1200m 182*71.5*53.5 850nm/ 940nm Weight 415g Product model： Product code： Date of purchase： 445g Warranty period： 8h(max) Output type AVI Storage type T F Card Battery life Voltage 3.
PAGE 7
E-mail：support@pard-tech.com Telephone：+86-(0)755-29484438 Website：www.pard-tech.
PAGE 8
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.