Full Product Manual

T60 Gas Mask
The T60 Mask uses high quality medical grade silicon rubber compositions made with non-toxic,
tasteless, and odorless materials. The mask is made to universally fit any size face to ensure a
perfect airtight seal in any environment. In addition to its universal fit, the T60 is designed for optimum
comfort by using individual straps to evenly distribute pressure around your face. The mask is
professional grade quality with low breathing resistance, anti-fog, lightweight, durable, and impact
resistant. The T60 is a great mask for all applicable toxic conditions including but not limited to:
industry, agriculture, scientific, transportation, energy, emergency rescue, and disaster relief.
Notes:
1. Gas mask should not be used in environments where the oxygen level is at or below 18%. Mask
should only be used in environments where temperature is -22 to 131 degrees Fahrenheit.
2. Do not use in enclosed tanks or other sealed container environments.
3. Do not exceed the maximum concentration environments set by filter labeling
4. Discontinue use if the product is cracked, damaged, or if the filter valve is deformed.
5. Always confirm the concentration and type of harmful gases in the place of operation to choose
appropriate filter.
6. Check the mask and filter is functioning properly if you should begin to feel discomfort in your
work, a decrease in airflow, or smell strong chemical odor.
Visual mask inspection
1. Before each use, visually inspect the mask for deformations to ensure the mask is in good working
order
2. Check the mask seal for cracks or rips.
3. Check the respirator (filter) seal to ensure it has not been ruptured.
4. Check to ensure the filter pods are properly installed and sealed.
5. Discontinue use if any problems are found.