User Manual for A610Pro Graphics Tablet Key Warnings: 1. Do not disassemble or refit the device. Damages such as heating, fire hazard, electric shock and personal injury may be caused if you don’t follow such instruction. The warranty will be void in case of any disassembly; 2. Do not excessively bend the USB cable to avoid any damage. Damaged or broken USB cables, or any touch with water and other liquid may cause malfunction, fire hazard and electric shock; 3.
User Manual Outline I Product Overview 1. Product Diagrams II Connection Methods 1. A610Pro Connection Methods 2. Computer System Requirements III Install Drive Programs 1. Installation Notes 2. Windows 3. Mac IV Introduction to the Driven Page 1. Windows 2. Mac V Remove Drive Programs 1. Windows 2.
I Product Overview A610Pro Diagrams Figure 1-1 Diagrams II Connection Methods How to Connect the A610Pro Graphics Tablet to Your Computer: The tablet supports connection to a computer and an Android device, and the factory default is the computer mode. 1. Computer Connection Connect the USB Type-C cable to your computer and graphics tablet. For desktop computers, please connect to the rear USB port of the computer case.
Figure 2-2 Android Device Connection III Install Drive Programs Support the following operating systems: Windows OS 10, 8 and 7 Mac OS 10.
indicates a successful connection; 2, Download the latest drive program on the official website of Parblo (www.parblo.com), then click “.pkg” to download after the file is decompressed; 3, You can find the icon in the Launchpad after a successful installation; 4, “Permission Settings Description” will jump when you turn on the driver for the first time. File descriptions should be installed to guide your settings in case of 10.14 or more advanced systems; for systems lower than Mac 10.
Figure 4-1 Windows Drive Page 1. Pen Settings Interface 1.1 Pen Key Settings Set functions of 2 keys in the drawing pen according to your needs.
Note: Click keys to activate functions only when the graphic drawing pen is within the sensing height (below 10mm) of A610Pro graphics tablet. The current keys’ function will show at the bottom of the display after you press keys; 1. 2Pressure Adjustment & the Current Pressure The change of the “Input” and “pressure” curve will adjust its pressure sensitivity. The current pressure shows the pressure sensitivity value. 1.2.1 The default pressure sensitivity—medium pressure Figure 4-3 Medium Pressure 1.2.
Figure 4-5 Harder Pressure 1.3 Coordinate Mode “Absolute Coordinate” indicates that the graphics tablet matches the coordinate position on display; “Relative Coordinate” indicates that the position of the graphics tablet relatively maps the screen’s resolution ratio site (also known as mouse mode) Figure 4-6 Coordinate Mode 1.4Windows Ink Check such function to support Windows handwriting tablet protocol, and partial drawing software support Windows Ink function.
Figure 4-8 Area Settings 2.1 Screen mapping The control area of the tablet pen can be selected as all displays or a single display, and the effective area can also be customized. 2.2 Left-handed mode The A610Pro tablet usage mode can be set, and the right-hand usage mode is the default. When selecting other modes, the A610Pro tablet needs to be rotated 180 degrees. 2.3 All areas The entire work area of the tablet is mapped to the display. 2.
Figure 4-10 Key Settings Notes: A. Set the input language to English when you are using shortcut keys, otherwise some functions may fail to work; B. You can customize the shortcut keys of the A610Pro tablet according to your needs; C. The key in the middle of the rotation is set to switch the rotation functions. 3.1 Key Settings you can customize the functions of K1, K2, K3, K4, K5, K6, K7 and K8. Click the drop-down list to select “Hot Keys” and enter the self-defined interface.
Figure 4-11 Self-defined Key 1 11
Figure 4-12 Self-defined Key 2 3.
Figure 4-13 Rotation Settings you can click the drop-down list to define your settings according to your actual demands.
Figure 4-15 Self-defined Rotation 2 3.3 hide hints & Disable express Keys Check “hide hints”, and no function names will be prompted during your use; Check “Disable express Keys”, and keys’ functions fail to work. 3.4 Self-defined Options Figure 4-16 Self-defined Option 1 The default setting is the Parblo built-in key + rotation function (Photoshop), and you can click to add in order to configure more software with self-defined keys’ functions.
Figure 4-17 Self-defined Option 2 15
Figure 4-18 Self-defined Option 3 Click the software icon that has been added to customize its key and rotation functions; Select the software icon and click “-” to delete the current software configuration; 4, Configuration Settings Figure 4-19 Configuration Settings You can save and read the set value of functions such as shortcut keys and rotation via export and import configuration. Note: When all the shortcut key functions are set, you can click "Export Configuration" to save your settings.
Figure 4-20 Export Configuration Figure 4-21 Import Configuration 5,Driver version 17
Figure 4-22 Driver version Show the current driver version: 1.6.1.1904 Mac You can find the PenTabletSetting icon in the Launchpad, then click to open the drive interface.
1, The Main Interface Figure 4-24 Drive Interface 1.1 Pen Settings Set functions of 2 keys in the drawing pen according to your needs. Select hot keys to customize settings in the drop-down list, and click “Default Button settings” to restore keys’ functions to factory default settings; Figure 4-25 Pen Settings Note: Click keys to activate functions only when the graphic drawing pen is within the sensing height (below 10mm) of A610Pro graphics tablet.
Check “Disable Display Message” to turn off the key/rotation function prompt; Check “Disable Key Function” to turn off the key function. Figure 4-26 Configuration Settings 1.2 Rotation Settings The default working mode is 0° (it means that it can be used on the left); You can adjust the laying style of A610Pro graphics tablet according the way that you hold pens, and now it supports 4 working angles. Figure 4-27 Rotation Angles 1.
2, Display Settings Users can select to make the graphic drawing pen control the whole display or Color LCD display/(null) display; Users can select “Portion of Monitor” to adjust the display area controlled by the graphics tablet.
Figure 4-31 Screen Setting 2 3, Working Area Settings 1.1 Whole Working Area It indicates that the whole working area maps the display, meaning that the whole working area of the graphics tablet controls the current display that has been selected.
Figure 4-32 Working Area Setting 1 1.2 Screen Ratio 1.2.1 Users can adjust the working area scale according to the display scale; 1.2.2 Users can adjust the working area size, and drag the red wireframe to set.
Figure 4-33 Working Area Setting 2 4, Key/Rotation Settings Figure 4-34 Key/Rotation Settings 24
Notes: A. Set the input language to English when you are using shortcut keys, otherwise some functions may fail to work; B. You can customize the shortcut keys of the A610Pro tablet according to your needs; C. The key in the middle of the rotation is set to switch the rotation’s functions. 4.1 Key Settings you can customize the functions of K1, K2, K3, K4, K5, K6, K7 and K8. Click the drop-down list to select “Self-defined” and enter the self-defined interface.
Figure 4-36 Hot Key Setting 2 Click “Keyboard Settings” to customize the function of shortcut keys for different software; a Click “+” 26
Figure 4-37 Self-defined Software Hot Key 1 b Select software that you want to add Figure 4-38 Self-defined Software Hot Key 2 27
c Set functions for each shortcut key in sequence Figure 4-39 Self-defined Software Hot Key 3 4.2 Rotation Settings you can click the drop-down list to define your settings according to your actual demands.
Click “Reset Customer defined” to set left/right rotation, and users can name such function. Figure 4-41 Rotation Setting 2 Click “Slider” to customize rotation function for each software.
Figure 4-42 Self-defined Software Rotation 1 b Select software that you want to add Figure 4-43 Self-defined Software Rotation 2 30
c Set functions for each shortcut key in sequence Figure 4-44 Self-defined Software Rotation 2 5, Configuration File Figure 4-45 Configuration File You can save and read the set value of functions such as shortcut keys and rotation via export and import configurations. Note: When all the shortcut key functions are set, you can click "Export Configuration" to save your settings.
Figure 4-46 Export Figure 4-47 Import 32
6, About Figure 4-48 About V Remove Drive Programs Windows Go to “Start Menu—Settings—APP” interface to find “Pentablet version 1.6.1.1904”, then click “Uninstall” and accomplish the removal according to instructions.
Figure 5-1 Remove (Windows) Mac Go to Finder—APP to find and open “PenTablet”, then find and double click “uninstallPenTablet” to remove according to instructions. 000.
Figure 5-2 Remove (Mac) 35
VI Frequently Asked Questions and Solutions 1. After installing the driver, it displays "device not connected", what should I do? (1) Check whether the connection between the USB cable and the tablet and computer port is loose. (2) Check whether the digital pen and the tablet are within the effective sensing height or whether the LED indicator of the digital tablet flickers when they touch the tablet. If they flicker, the communication is normal.
(5) Restart Photoshop, if there is still no pressure, go to step 6. (6) Uninstall and reinstall the driver, and restart the computer. 3. What should I do if there is no pressure in painting in sai2? (1) Open sai 2 and select "Settings" under "Help". (2) Check "Use Windows API" and click "OK".
(3) Set the minimum brush size to 0%. 4. What should I do if there is no pressure in painting in AI? Take AI2020 as an example: (1) Select the brush tool and open the "brush options" in the brush drop-down list.
(2) In the brush options window, select the brush size as "pressure" (3) Set the pressure sensitivity variable size equal to the brush size such as "5", click "OK".
5.What should I do if the pen on the tablet does not work? (1) Check whether the connection between the USB cable and the tablet port and computer port is loose. (2) Check whether the digital pen and tablet are within the effective sensing height or whether the LED indicator of the tablet is flickering when touching the tablet. If it flickers, it means the communication is normal; if there is no flicker, please try to replace the computer port or connection line.
(2) Find "Pen and Touch" in "Control Panel" and open it. (3) Click "Long press, right-click", and then click "Settings" to open the long press setting window.
(4) Do not check "Use long press as right-click" and click "OK" twice.
7. How to connect the A610Pro tablet to an Android device? (1) Turn on the OTG switch on the Android phone (tablet) (some devices are turned on by default, please ignore). (2) Choose the OTG adapter that fits the interface of your mobile phone (tablet computer) and insert it into your mobile phone (tablet computer). (3) Then connect the USB head to the OTG adapter, and the Type-c port to the digital tablet. Keep the mobile phone (tablet) and the tablet vertically (as shown in the figure below).
(5) You can open your painting software and start using it.
