User Guide

-5-
D/AC-1100 HD Specifications
Frequency Response: 2 Hz - 20 kHz, I0.25 dB
Signal to Noise Ratio: > 108 dB, 113 dB typical
Channel Separation: > 100 dB @ I kHz
Total Harmonic Distortion: < 0.0015% @ 1 kHz
Amplitude Linearity: >100 dB; 102 dB typical
Phase Linearity: +/- 0° @ 20 kHz
Maximum Jitter (HF): < 50 picoseconds RMS, using selected low jitter Crystal
8412 Digital Interface Receiver
D-A Converters: Two Burr-Brown PCM 63P-J 20 bit, push-pull for each
channel and fully balanced digital operation
Oversampling Rate: 8 X (352.8-kHz)
Digital Input: 32 kHz, 4.1 kHz, 48 kHz; Consumer standard SPDIF
Digital Filters: PMD-100 High Definition Compatable Digital
Digital Process Decoder
Absolute Polarity: 0° or 180° switchable
Digital Inputs: Coaxial: 75 Ω RCA
TOSlink fiber optic: EIAJ Standard CP-340/RC-5720,
660 nm typical wavelength
AES/EBU Balanced XLR
Outputs: Unbalanced Analog Line Out: 3.0 V nominal, 600 Ω,
Digital: 75 Ω RCA coaxial, 0.5 V peak-to-peak
Power Supplies: 3 separate transformers and nine regulators for digital
circuits and for each analog channel
Power Requirement: 120 V, 60 Hz, 18W; may be re-wired for 220-240 V, 50 Hz
Dimensions: 19” W x 3” H (3 5/8 with feet) x 13 1/8" D
Net Weight: 12.5 lb.
Specifications subject to change or improvement without notice