User Guide

1 18 direct setup handling 65 select source label for current source 0..48 0: default label, 1: custom label, 2..48:
pre-defined label
66 associate component video input for
current source
0..2 0: none, 1: component input 1, 2:
component input 2
67 adjust trigger source status for current
source
0..1 0: no, 1: yes
68 adjust source level for current source -16..16 level offset in dBs
69 adjust analog input gain for current
source
-16..16 input gain offset in dBs
70 adjust subwoofer trim level (temporary) -16..16 trim offset in dBs
71 adjust surround trim level (temporary) -16..16 trim offset in dBs
72 adjust center trim level (temporary) -16..16 trim offset in dBs
73 adjust LFE channel trim level (temporary) -10..0 trim offset in dBs
74 select main speaker range 0..1 0: large, 1: small
75 select center speaker range 0..2 0: large, 1: small, 2: none
76 select surround speaker range 0..2 0: large, 1: small, 2: none
77 select subwoofer speaker presence
status
0..1 0: no, 1: yes
78 adjust bass limiter -55..0 bass limiter value in dBs
79 adjust left speaker level -32..32 speaker level offset in half dBs
80 adjust center speaker level -32..32 speaker level offset in half dBs
81 adjust right speaker level -32..32 speaker level offset in half dBs
82 adjust right surround speaker level -32..32 speaker level offset in half dBs
83 adjust left surround speaker level -32..32 speaker level offset in half dBs
84 adjust subwoofer speaker level -32..32 speaker level offset in half dBs
85 adjust left speaker delay 0..10 speaker delay in half milliseconds
86 adjust center speaker delay 0..10 speaker delay in half milliseconds
87 adjust right speaker delay 0..10 speaker delay in half milliseconds
88 adjust right surround speaker delay 0..30 speaker delay in half milliseconds
89 adjust left surround speaker delay 0..30 speaker delay in half milliseconds
90 adjust subwoofer speaker delay 0..10 speaker delay in half milliseconds
91 adjust OSD status for composite output 0..1 0: no, 1: yes
92 adjust OSD status for S-Video output 0..1 0: no, 1: yes
93 adjust OSD status for component output 0..1 0: no, 1: yes
94 select default color system for OSD 0..1 0: NTSC, 1: PAL
95 select source for main trigger 0..6 0: power, 1: manual, 2: dim, 3: status, 4:
source, 5: comp. vid., 6: dig. audio
96 select polarity for main trigger 0..1 0: normal, 1: inverted
97 adjust (de)activation delay for main
trigger
0..90 delay in seconds
98 select source for zone trigger 0..6 0: power, 1: manual, 2: dim, 3: status, 4:
source, 5: comp. vid., 6: dig. audio
99 select polarity for zone trigger 0..1 0: normal, 1: inverted
100 adjust (de)activation delay for zone
trigger
0..90 delay in seconds
101 laserdisk video source (for automatic RF
input change)
0..6 0: none, 1..6: video 1..video 6
102 select sleep timer volume ramping speed 0..1 0: fast, 1: slow
103 select tuner region 0..1 0: US/Canada, 1: Europe
Sample Rate Systems Oy Page 15