Missing part? Damaged? Contact us via email at service@domioutdoorliving.com www.domioutdoorliving.com © Copyright 2022-2024 domi LLC. I All Rights Reserved.
！ Us ebol t st os ecur et hef r amet ot hegr oundt oagai ns tt hes t r ongwi nd.
1 Pole Beam Beam Beam Beam Beam Connector Corner Roof Bar Corner Roof Bar Connector Roof Bar Solidfying Bar Solidfying Bar Solidfying Bar Finishing Bar Finishing Bar Finishing Bar Finishing Bar
2 Finishing Bar Finishing Bar Finishing Bar Finishing Bar Finishing Bar Finishing Bar Finishing Bar Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel
3 Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel
Roof Panel Roof Panel Net Frame Net Frame Net Frame Joint Cover Union Bar Inside Roof Connector Outside Roof Connector Bracket Hook 4 Base Finishing End Bracket Spacer Finishing End Corner Solidifying Bar Joint Cover Corner Solidifying Bar J-Hook Bracket Bracket Joint Cover Bracket Corner Cover Solid Sidewall Mosquito Sidewall
Plastic Bracket 5 Plastic Bracket Plastic Bracket
(1) Attach 2 Part #B1 to Part #A with 4 Bolts #8. (2) Attach 2 Part #B2 to Part #A with 4 Bolts #6. 6 (3) Attach Part #B to Part #A with 3 Bolts #8. (4) Repeat the above procedures to assemble the other 3 Part #A.
(1) Insert Part #C2 into Part #C1 and secure with 3 Bolts #8. (4) Insert Part #X into the beam. 7 (2) Insert the other side of Part #C2 into Part #C and secure with 3 Bolts #8. (3) Connect Part #C1 and Part #C through Part #C2. (5) Secure the bottom of Part #X and Part #C/C1 with 3 Bolts #8. (6) Repeat the above procedures to assemble the other Part #C and Part #C1.
(2) Insert the other side of Part #C2 into Part #D2 and secure with 3 Bolts #8. (3) Connect Part #D and Part #D2 through Part #C2. (1) Insert Part #C2 into Part #D, and secure with 3 Bolts #8. (4) Insert Part #X into the beam and secure with 1 Bolt #8. (5) Secure the bottom of Part #X and Part #D/D2 with 3 Bolts #8. 8 (6) Repeat the above procedures to assemble the other Part #D & #D1 & #D2.
(1) Connect Part #C/C1 and #D/D1 to Part #A with 8 Bolts #4. (From Outside) (2) Repeat the above procedures to assemble the other 3 corners. Please don't tighten all bolts.
(1) Connect Part #C/C1 and #D/D1 to Part #A with 4 Bolts #8. (From Inside) Repeat the above procedures to assemble the other 3 corners. 10 Please don't tighten all bolts.
(1) Affix Part #R and Part #R1 to the frame with 8 Bolts #8. Repeat the above procedures to assemble the other 3 corners. 11 Please don't tighten all bolts.
(1) Cover the corner with Part #X1. (2) Secure with 2 Self-tapping Screws #3. (from top to bottom) (3) Secure with 2 Self-tapping Screws #3. (from bottom to top) 12 Repeat the above procedures to assemble the other 3 corners. Tighten all bolts.
Assemble the 4 Corner Roof Bars: (1) Connect Part #E1 and Part #E with 2 Bolts #8 . (2) Attach Part #U to Part #E with Bolt #8 . 13 (3) Repeat the above procedures to assemble the other 3 corner roof bars.
Please have a freestanding ladder ready at the center of the gazebo. (1) Place 4 Part #E1 on the 4 corners of Part #S. Secure with 8 Bolts #8. (from bottom to top) ATTENTION: You can also finish this step on the ground and then lift 4 corner roof bars and inside roof connector to the top together. (Need 2 people and 2 ladders) Outside View Outside View 14 (2) Place 4 Part #E on 4 Part #A; Secure with 8 Bolts #8.
(1) Attach Part #U1 to Part #E2 with Bolt #7 . 15 (2) Repeat the above procedures to assemble the other 7 roof bars.
(1) Place Part #E2 on part #S. Secure with Bolt #8 (from bottom to top). C Outside View C1 C1 C Inside View (2) Connect Part #E2 and the Assembled Beam (C&C1) with part #U1; Secure with 2 Bolts #8. 16 (3) Repeat the above procedures to assemble the opposite side.
(1) Place Part #E2 on Part #S. Secure with Bolt #8 (from bottom to top). Outside View D D2 D1 D1 D2 D Inside View (2) Connect Part #E2 and the Assembled Beam (D1&D2&D) with part #U1. Secure with 2 Bolts #8. 17 (3) Repeat the above procedures to assemble the opposite side.
(1) Place 2 Part #E2 on Part #S. Secure with 2 Bolts #8 (from bottom to top). Outside View Inside View (2) connect 2 Part #E2 and the Assembled Beam with 2 part #U1. Secure with 4 Bolts #8. 18 (3) Repeat the above procedures to assemble the opposite side.
Inside View (1) Secure Part #T to Part #S and Part #S1. ATTENTION: The holes of Part #S and Part #S1 need to be aligned, on the same vertical line.
U3 G1 U3 U3 G1 U3 G1 U3 G1 U3 (1) Insert Part #U3 into Part #G1 (2) Insert 2 Part #U3 into Part #G1 and secure with Blot #8. and secure with 2 Blots #8. Inside View (3) Attach Part #G1 and Part #U3 to Part #E2 with Blot #7. (3) Attach Part #G1 and Part #U3 to Part #E2 with Blot #7. (4) Attach Part #G1 and Part #U3 to Part #E2 with Bolt #7 and Blot #8. 20 Outside View (5) Repeat the above procedures to assemble the opposite side.
Inside View (1) Insert Part #G into Part #U3 and secure with Bolt #8. Outside View 21 (2) Repeat the above procedures to assemble the opposite side.
Outside View
E Outside View (1) Insert Part #U2 into Part #F and Part #G. (2) Secure with 2 Bolts #8. (3) Secure them to Part #E with Bolt #8. 23 (4) Repeat the above procedures to assemble the other 3 sides.
(1) Connect Part #J1 and Part #Q1 with 2 Bolts #7 and 2 Nuts #5. (2) Connect Part #J2 and Part #Q2 with 2 Bolts #7 and 2 Nuts #5.
Overlap Inside View Place the Assembled J1 & Q1 and J2 & Q2 on Part #E2, securing with 3 Bolts #8. 25 Repeat the above procedures to assemble the opposite side.
(1) Connect Part #J and Part #Q with 2 Bolts #7 and 2 Nuts #5. (2) Place the Assembled Part #J & #Q on Part #E2, securing with 1 Bolt #8. Inside View 26 (3) Repeat the above procedures to assemble the opposite side.
(1)Place Part #J and Part #J1 on Part #E; put on Part #X3 and secure with Self-tapping Screw #2. Inside View Repeat the above procedures to assemble the other 3 corners.
Cover Part #Z, #Z1 & #Z2 to Roof Panels.
Cover Part #Z to Roof Panels.
ATTENTION: The bigger roof panel need to cover the smaller one. (1) Insert Part #N1, Part #N2 and Part #N3 into the frame. 30 (2) Insert Part #N5, Part #N4 and Part #N3 into the frame. (3) Repeat the above procedures to assemble the opposite side.
(1) Attach Part #H1 to Part #E2, securing with Bolt #8. (2) Attach Part #H2 to Part #E2, securing with Bolt #8. (3) Place Part #H1 and Part #H2 on Part #E2; put on Part #X2 and secure with Bolt #8. 31 (4) Repeat the above procedures to assemble the opposite side.
ATTENTION: The bigger roof panel need to cover the smaller one. (1) Insert Part #L1 and Part #L2 into the frame. 32 (2) Insert Part #L4 and Part #L3 into the frame. (3) Attach Part #H to Part #E2, securing with Bolt #8.
Place Part #H and Part #H2 on Part #E1; put on Part #X3 and secure with Self-tapping Screw #2 Outside View Repeat the above procedures to assemble the other 3 corners.
Cover Part #Z to Roof Panels Section View 34
Cover Part #Z to Roof Panels 35
Cover Part #Z to Roof Panels 36
#9 #11 Part #W should be inserted between roof panels and solidifying bar or beams, then secure with bolts and nuts.
ATTENTION: The bigger roof panel need to cover the smaller one. (1) Insert Part #P1 and Part #P2 into the frame in sequence. (2) Insert Part #P10 and Part #P9 into the frame in sequence. (3) Place 8 Part #W between roof panels and beams. Then secure with 8 Bolts #10 and 8 Nuts #5. (4) Repeat the above procedures to assemble the opposite side.
ATTENTION: The bigger roof panel need to cover the smaller one. (1) Insert Part #P3 into the frame. (3) Place 4 Part #W between roof panels and solidifying bars. Then secure with 4 Bolts #12 and 4 Nuts #5. (2) Insert Part #P8 into the frame. (4) Place 6 Part #W between roof panels and beams. Then secure with 6 Bolts #10 and 6 Nuts #5. (5) Repeat the above procedures to assemble the opposite side.
ATTENTION: The bigger roof panel need to cover the smaller one. (1) Insert Part #P4 into the frame. (3) Place 4 Part #W between roof panels and solidifying bars. Then secure with 4 Bolts #12 and 4 Nuts #5. (2) Insert Part #P7 into the frame. (4) Place 6 Part #W between roof panels and beams. Then secure with 6 Bolts #10 and 6 Nuts #5. (5) Repeat the above procedures to assemble the opposite side.
ATTENTION: The bigger roof panel need to cover the smaller one. (1) Insert Part #P5 into the frame. (3) Place 4 Part #W between roof panels and solidifying bars. Then secure with 4 Bolts #12 and 4 Nuts #5; Place 1 Part #W between roof panels and Part #E2. Then secure with 1 Bolt #9 and 1 Nut #5. (2) Insert Part #P6 into the frame. (4) Place 6 Part #W between roof panels and beams. Then secure with 6 Bolts #10 and 6 Nuts #5; Place 1 Part #W between roof panels and Part #E2.
ATTENTION: The bigger roof panel need to cover the smaller one. (1) Insert Part #M1 and Part #M2 into the frame in sequence. (2) Insert Part #M8 and Part #M7 into the frame in sequence. (3) Place 6 Part #W between roof panels and beams. Then secure with 6 Bolts #10 and 6 Nuts #5. (4) Repeat the above procedures to assemble the opposite side.
ATTENTION: The bigger roof panel need to cover the smaller one. (1) Insert Part #M3 into the frame. (3) Place 4 Part #W between roof panels and solidifying bars. Then secure with 4 Bolts #12 and 4 Nuts #5. (2) Insert Part #M6 into the frame. (4) Place 6 Part #W between roof panels and beams. Then secure with 6 Bolts #10 and 6 Nuts #5. (5) Repeat the above procedures to assemble the opposite side.
ATTENTION: The bigger roof panel need to cover the smaller one. (1) Insert Part #M4 into the frame. (3) Place 4 Part #W between roof panels and solidifying bars. Then secure with 4 Bolts #12 and 4 Nuts #5; Place 1 Part #W between roof panels and Part #E2. Then secure with 1 Bolt #9 and 1 Nut #5. (2) Insert Part #M5 into the frame. (4) Place 6 Part #W between roof panels and beams. Then secure with 6 Bolts #10 and 6 Nuts #5; Place 1 Part #W between roof panels and Part #E2.
Place Part #W between roof panels and Part #E2. Then secure with Bolt #11 and Nut #5. Repeat the above procedures to assemble the other 3 sides.
(1) Attach Part #K4 to Part #E2, securing with Bolt #8. (2) Place Part #K3 on Part #K4 and Part #E2; Put on Part #X2 and secure with Bolt #8. (3) Place Part #K2 on Part #K4 and Part #E2; Put on Part #X2 and secure with Bolt #8. (4) Repeat the above procedures to assemble the opposite side.
Attach Part #K and Part #K1 to the frame; Put on Part #X2 and secure with Bolt #8. Repeat the above procedures to assemble the opposite side.
Place Part #K and Part #K3 on Part #E; Put on Part #X3 and secure with Self-tapping Screw #2. Repeat the above procedures to assemble the other 3 corners.
Attach roof panels to finishing bars with 2 Self-tapping Screws #3. Repeat the above procedures to assemble the other 3 sides.
128 How to Put the 128 Hooks into the Double-track Double-track 7 Hooks × 2 Rows 9 Hooks × 2 Rows 7 Hooks × 2 Rows 9 Hooks × 2 Rows 9 Hooks × 2 Rows 9 Hooks × 2 Rows 7 Hooks × 2 Rows 7 Hooks × 2 Rows
(1) Place 7 hooks on each slot of the Sidewall Track(C1&C). (2) Install Part #T1 at the joint of Part C&C1 with Bolt #8. Double-track (3) Repeat the above procedures to assemble the opposite side.
(1) Place 9 hooks on each slot of the Sidewall Track(D&D1&D2). (2) Install Part #T1 at the middle of Part #D2 with Bolt #8 . Double-track (3) Repeat the above procedures to assemble the opposite side.
Hang up Mosquito Sidewalls to Inside Track
Hang up Solid Sidewalls to Outside Track
Thanks for your purchase. At domi outdoor living, we believe in our products. That’s why we provide a 12-month warranty and friendly, casy-to-reach after-sales service. So if you have any questions about our product and assembly,please feel free to contact us. We will be here for you. Support: After-sales contact email: service@domioutdoorliving.com Please tell us your order ID when contact. Attach photos of damaged part for instant reply. © Copyright 2022-2024 domi LLC. I All Rights Reserved.
