2'×16' Metal Patio Wood Gazebo MODEL#:LGMF1638 Missing part? Damaged? Contact us via email at service@domioutdoorliving.com www.domioutdoorliving.com © Copyright 2023-2025 domioutdoorliving LLC. All Rights Reserved.
×16
×16
Wood Post Beam Beam Beam Beam Beam Corner Roof Bar Corner Roof Bar Connector Middle Roof Bar Solidifying Bar Solidifying Bar Solidifying Bar Finishing Bar Finishing Bar Finishing Bar Finishing Bar
Finishing Bar Finishing Bar Finishing Bar Finishing Bar Finishing Bar Finishing Bar Finishing Bar Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel
Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel
Roof Panel Roof Panel Net Frame Net Frame Net Frame Post Base Base Cover Joint Bar Corner Solidifying Bar Bracket Corner Solidifying Bar Joint Cover Bracket Corner Cover Bracket Inside Roof Cover Bracket Plastic Hook Finishing End Outside Roof Cover J-Hook Bracket Bracket Spacer Finishing End Joint Cover Curtain
Mosquito Netting Plastic Bracket Plastic Bracket Plastic Bracket Wrench Drill Plastic Cap
(2) Insert the other side of Part #C2 into Part #D2 and secure with 3 Bolts #8. (1) Insert Part #C2 into Part #D and secure with 3 Bolts #8. (4) Insert Part #X into the beam and secure with 1 Bolt #8. (3) Connect Part #D and Part #D2 through Part #C2. (5) Secure the bottom of Part #X and Part #D&#D2 or Part #D2&#D1 with 3 Bolts #8. (6) Repeat the above procedures to assemble the other Part #D & #D1 & #D2.
Outside View Outside View Inside View (1) Connect Part #D to Part #A with 2 Bolts #17, and fix from the other side with 2 gaskets and nuts #18.(The first row of screw holes) (2) Connect Part #C to Part #A with 2 Bolts #17, and fix from the other side with 2 gaskets and nuts #18.(The second row of screw holes) (3) Secure Part #D & #C with 4 Bolts #14 as shown. (4) Repeat the above procedures to assemble the other 3 corners.
Outside View
Inside Roof Cover
(2) Repeat the above procedures to assemble the other 7 roof bars.
2x
2x D2 D2
4x 4x (2) Connect Part #E2 and the Assembled Beam (D1&D2&D) with part #U1. Secure with 2 Bolts #8. (3) Repeat the above procedures to assemble the opposite side.
Outside Roof Cover
(1) Insert Part #U3 into Part #G1 (2) Insert 2 Part #U3 into Part #G1 and secure with Blot #8. and secure with 2 Blots #8. Inside View (3) Attach Part #G1 and Part #U3 to Part #E2 with Blot #7. (4) Attach Part #G1 and Part #U3 to Part #E2 with Bolt #7 and Blot #8. (5) Attach Part #G1 and Part #U3 to Part #E2 with Blot #7. Outside View (6) Repeat the above procedures to assemble the opposite side.
Inside View (1) Attach Part #G and Part #U3 to Part #E2 with Bolt #8 Outside View (2) Repeat the above procedures to assemble the opposite side.
(2) Attach 2 Part #F and Part #U3 to Part #E2 with Blot #7 and Blot #8.
(1) Insert Part #U2 into Part #F and Part #G. (2) Secure with 2 Bolts #8. (3) Secure them to Part #E with Bolt #8. (4) Repeat the above procedures to assemble the other 3 sides.
(1) Connect Part #J1 and Part #Q1 with 2 Bolts #7 and 2 Nuts #5. X2 X2 (2) Connect Part #J2 and Part #Q2 with 2 Bolts #7 and 2 Nuts #5.
(1) Place the Assembled J1 & Q1 and J2 & Q2 on Part #E2, secure with 3 Bolts #8. Inside View E2 E2 E2 (2) Repeat the above procedures to assemble the opposite side.
(1) Connect Part #J and Part #Q with 2 Bolts #7 and 2 Nuts #5. X2 (2) Place the Assembled Part #J & #Q on Part #E2, securing with 1 Bolt #8. Inside View X2 (3) Repeat the above procedures to assemble the opposite side.
Cover Part #Z, #Z1 & #Z2 to Roof Panels.
Cover Part #Z to Roof Panels.
If you can’t install N2, N3 or N4, push the outside roof cover up and try to insert them again. (1) Insert Part #N1, N2,N3*2,N4,N5 into the frame. (2) Repeat the above procedures to assemble the opposite side.
(1) Place Part #H1 and Part #H2 on Part #E2,and secure with 2 Bolt #8. (2) put on Part #X2 and secure with Bolt #8. (3) Repeat the above procedures to assemble the opposite side.
(1) Insert Part #L1 and Part #L2 into the frame. (2) Insert Part #L4 and Part #L3 into the frame.
Cover Part #Z to Roof Panels
Cover Part #Z to Roof Panels
Cover Part #Z to Roof Panels
#9 #11 Part #W should be inserted between roof panels and solidifying bar or beams, then secure with bolts and nuts.
ATTENTION: The bigger roof panel need to cover the smaller one. (1) Insert Part #P1, Part #P2 into the frame. (2) Place 3 Part #W between roof panels and beams. Then secure with 3 Bolts #10 and 3 Nuts #5. Beam (3) Insert Part #P10, Part #P9 into the frame. (4) Place 3 Part #W between roof panels and beams. Then secure with 3 Bolts #10 and Beam 3 Nuts #5. (5) Repeat the above procedures to assemble the opposite side.
ATTENTION: The bigger roof panel need to cover the smaller one. (1) Insert Part #P3 into the frame. (2) Place 2 Part #W between roof panels #P3 and solidifying bars. Then secure with 2 Bolt #12 and 2 Nuts #5. Solidifying Bar (3) Place 3 Part #W between roof panels #P3 and beams. Then secure with 3 Bolts #10 and 3 Nuts #5. Beam (4) Repeat the above procedures to assemble roof panel #P8 and the opposite side.
ATTENTION: The bigger roof panel need to cover the smaller one. (1) Insert Part #P4 into the frame. (2) Place 2 Part #W between roof panels #P4 and solidifying bars. Then secure with 2 Bolt #12 and 2 Nuts #5. Solidifying Bar (3) Place 3 Part #W between roof panels #P4 and beams. Then secure with 3 Bolts #10 and 3 Nuts #5. Beam (4) Repeat the above procedures to assemble roof panel #P7 and the opposite side.
ATTENTION: The bigger roof panel need to cover the smaller one. (1) Insert Part #P5 and #P6 into the frame. (2) Place 5 Part #W between roof panels and solidifying bars. Then secure with 4 Bolt #12, 1 Bolt #9 and 4 Nuts #5. Solidifying Bar 20x (3) Place 7 Part #W between roof panels and beams. Then secure with 4 Bolts #12, 1 Bolt #9 and 6 Nuts #5. Beam (4) Repeat the above procedures to assemble the opposite side.
ATTENTION: The bigger roof panel need to cover the smaller one. (1) Insert Part #M1, Part #M2 into the frame. (2) Place 3 Part #W between roof panels and beams. Then secure with 3 Bolts #10 and 3 Nuts #5. Beam (3) Insert Part #M8, Part #M7 into the frame. (4) Place 3 Part #W between roof panels and beams. Then secure with 3 Bolts #10 and 3 Nuts #5. Beam (5) Repeat the above procedures to assemble the opposite side.
ATTENTION: The bigger roof panel need to cover the smaller one. Solidifying Bar (1) Insert Part #M3 into the frame. (2) Place 2 Part #W between roof panels #M3 and solidifying bars. Then secure with 2 Bolt #12 and 2 Nuts #5. (3) Place 3 Part #W between roof panels #M3 and beams. Then secure with 3 Bolts #10 and 3 Nuts #5. Beam (4) Repeat the above procedures to assemble roof panel #M6 and the opposite side.
ATTENTION: The bigger roof panel need to cover the smaller one. Solidifying Bar (1) Insert Part #M4 and #M5 into the frame. (2) Place 5 Part #W between roof panels and solidifying bars. Then secure with 4 Bolt #12, 1 Bolt #9 and 4 Nuts #5. (3) Place 7 Part #W between roof panels and beams. Then secure with 6 Bolts #10, 1 Bolt #9 and 6 Nuts #5. Beam (4) Repeat the above procedures to assemble the opposite side.
(1) Place Part #W between roof panels and Part #E2. Then secure with Bolt #11 and Nut #5. (2) Repeat the above procedures to assemble the other 3 sides.
(1) Place Part #K2 or #K4 and Part #K3 or #K4 on Part #E2; Put on Part #X2 and secure with Bolt #8. (2) Secure K4 on E2 with Bolt #8. (3) Repeat the above procedures to assemble the opposite side.
(1) Place Part #K and Part #K1 on Part #E2; Put on Part #X2 and secure with Bolt #8. (2) Repeat the above procedures to assemble the opposite side.
X3 (1) Place Part #K3 and Part #K on Part #E; Put on Part #X3 and secure with Self-tapping Screw #2. (2) Repeat the above procedures to assemble the other 3 corners.
(1) Attach roof panels to finishing bars with 2 Self-tapping Screws #3. (2) Repeat the above procedures to assemble the other 3 sides.
How to the 128 Hooks into the Double-track Double-track 7 Hooks × 2 Rows 9 Hooks × 2 Rows 7 Hooks × 2 Rows 9 Hooks × 2 Rows 9 Hooks × 2 Rows 7 Hooks × 2 Rows 9 Hooks × 2 Rows 7 Hooks × 2 Rows
(1) Place 7 hooks on each slot of the Sidewall Track(C1&C). (2) Install Part #T1 at the joint of Part C&C1 with Bolt #8. 2x Double-track (3) Repeat the above procedures to assemble the opposite side.
(1) Place 9 hooks on each slot of the Sidewall Track(D&D1). (2) Install Part #T1 at the joint of Part D&D1 with Bolt #8. Double-track (3) Repeat the above procedures to assemble the opposite side.
Hang up Mosquito Sidewalls to Inside Track
Hang up Solid Sidewalls to Outside Track
© Copyright 2023-2025 domioutdoorliving LLC. All Rights Reserved.
