2' ×12' Metal Patio Gazebo ASSEMBLY MANUAL MODEL# : LGMF1 5 8 8 Missing part? Damaged? Contact us via email at domiservice01@outlook.com © Copyright 2022-2024 domi LLC. I All Rights Reserved.
! Us ebol t st os ecur et hef r amet ot hegr oundt oagai ns tt hes t r ongwi nd.
Pole Beam Beam Corner Roof Bar Corner Roof Bar Connector Roof Bar Solidfying Bar Finishing Bar Finishing Bar Finishing Bar Finishing Ba Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel
Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Net Frame Base Joint Cover Joint Cover Corner Solidifying Bar Corner Solidifying Bar Inside Roof Connector Outside Roof Connector J-Hook Bracket Bracket Bracket Bracket Joint Cover Hook Spacer Union Bar
Bracket Corner Cover Finishing End Finishing End Solid Sidewall Mosquito Sidewall Plastic Bracket Plastic Bracket Plastic Bracket
(1) Attach 2 Part #B1 to Part #A with 4 Bolts #8. (2) Attach 2 Part #B2 to Part #A with 4 Bolts #6. (3) Attach Part #B to Part #A with 3 Bolts #8. (4) Repeat the above procedures to assemble the other 3 Part #A.
(1) Insert Part #C2 into Part #C1 and secure with 3 Bolts #8. (4) Insert Part #X into the beam. (2) Insert the other side of Part #C2 into Part #C and secure with 3 Bolts #8. (3) Connect Part #C1 and Part #C through Part #C2. (5) Secure the bottom of Part #X and Part #C/C1 with 3 Bolts #8. (6) Repeat the above procedures to assemble the other Part #C and Part #C1.
(1) Connect Part #C/C1 to Part #A with 8 Bolts #4.(From Outside) (2) Repeat the above procedures to assemble the other 3 corners. ! Please don't tighten all bolts.
(1) Connect Part #C/C1 to Part #A with 4 Bolts #8.(From Inside) (2) Repeat the above procedures to assemble the other 3 corners. ! Please don't tighten all bolts.
(1)Affix Part #R and Part #R1 to the frame with 8 Bolts #8 (2) Repeat the above procedures to assemble the other 3 corners. ! Please don't tighten all bolts.
(1) Cover the corner with Part #X1. (2) Secure with 2 Self-tapping Screws #3. (from top to bottom) (3) Secure with 2 Self-tapping Screws #3. (from bottom to top) (4) Repeat the above procedures to assemble the other 3 corners. ! Tighten all bolts.
Assemble the 4 Corner Roof Bars: (1) Connect Part #E1 and Part #E with 2 Bolts #8 . (2) Attach Part #U to Part #E with Bolt #8 . 11 (3) Repeat the above procedures to assemble the other 3 corner roof bars.
Please have a freestanding ladder ready at the center of the gazebo. (1) Place 4 Part #E1 on the 4 corners of Part #S. Secure with 8 Bolts #8 (from bottom to top) ATTENTION: You can also finish this step on the ground and then lift 4 corner roof bars and inside roof connector to the top together. (Need 2 people and 2 ladders) Outside View (2) Place 4 Part #E on 4 Part #A; Secure with 8 Bolts #8.
(1) Attach Part #U1 to Part #E2 with Bolt #7 . 13 (2) Repeat the above procedures to assemble the other 3 roof bars.
Outside View (1) Place Part #E2 on part #S. Secure with Bolt #8 (from bottom to top). C C1 C C1 C C1 C1 C Inside View (2) Connect Part #E2 and the Assembled Beam(C&C1) with part #U1. Secure with 2 Bolts #8 . (3) Repeat the above procedures to assemble the other 3 sides.
Secure Part #T to Part #S and Part #S1. Outside View ATTENTION: The holes of Part #S and Part #S1 need to be aligned, on the same vertical line.
(1) Insert Part #U3 into 2 Part #F. (2) Attach Part #F to the Part #E2 with 1 Bolt #7 and 2 Blots #8. Inside View (3) Repeat the above procedures to assemble the other 3 sides.
Inside View (1) Insert Part #U2 into 2 Part #F . (2) Secure with 2 Bolts #8. (3) Secure them to Part #E with Bolt #8. (4) Repeat the above procedures to assemble the other 3 sides.
(1) Connect Part #J and Part #Q with 2 Bolts #7 and 2 Nuts #5. (2) Place the Assembled Part #J & #Q on Part #E2, securing with 1 Bolt #8. (3) Repeat the above procedures to assemble the other 3 sides.
(1) Place 2 Part #J on Part #E, put on Part #X3 and secure with Self-tapping Screw #2. Inside View (2) Repeat the above procedures to assemble the other 3 corners.
Cover Part #Z, #Z1 & #Z2 to Roof Panels.
ATTENTION: The bigger roof panel need to cover the smaller one. (1) Insert Part #L1 and Part #L2 into the fame. (2) Insert Part #L3 and Part #L4 into the fame. (3) Attach Part #H to Part #E2, securing with Bolt #8. (4) Repeat the above procedures to assemble the other 3 sides.
(1) Place 2 Part #H on Part #E1, put on Part #X3 and secure with Self-tapping Screw #2. Outside View (2) Repeat the above procedures to assemble the other 3 corners.
Cover Part #Z to Roof Panels Section View
ATTENTION: The bigger roof panel need to cover the smaller one. (1) Insert Part #M1 and Part #M2 into the frame. (2) Insert Part #M8 and Part #M7 into the frame. (3) Place 6 Part #W between roof panels and beams. Then secure with 6 Bolts #10 and 6 Nuts #5. (4) Repeat the above procedures to assemble the opposite side.
ATTENTION: The bigger roof panel need to cover the smaller one. (3) Place 4 Part #W between roof panels and solidifying bars. Then secure with 4 Bolts #12 and 4 Nuts #5. (1) Insert Part #M3 into the frame. (2) Insert Part #M6 into the frame. (4) Place 6 Part #W between roof panels and beams. Then secure with 6 Bolts #10 and 6 Nuts #5. (5) Repeat the above procedures to assemble the opposite side.
ATTENTION: The bigger roof panel need to cover the smaller one. (1) Insert Part #M4 into the frame. (3) Place 4 Part #W between roof panels and solidifying bars. Then secure with 4 Bolts #12 and 4 Nuts #5; Place 1 Part #W between roof panels and Part #E2. Then secure with 1 Bolt #9 and 1 Nut #5. (2) Insert Part #M5 into the frame. (4) Place 6 Part #W between roof panels and beams. Then secure with 6 Bolts #10 and 6 Nuts #5; Place 1 Part #W between roof panels and Part #E2.
ATTENTION: The bigger roof panel need to cover the smaller one. (1) Insert Part #M1 and Part #M2 into the frame. (2) Insert Part #M8 and Part #M7 into the frame. (3) Place 6 Part #W between roof panels and beams. Then secure with 6 Bolts #10 and 6 Nuts #5. (4) Repeat the above procedures to assemble the opposite side.
ATTENTION: The bigger roof panel need to cover the smaller one. (1) Insert Part #M3 into the frame. (3) Place 4 Part #W between roof panels and solidifying bars. Then secure with 4 Bolts #12 and 4 Nuts #5. (2) Insert Part #M6 into the frame. (4) Place 6 Part #W between roof panels and beams. Then secure with 6 Bolts #10 and 6 Nuts #5. (5) Repeat the above procedures to assemble the opposite side.
ATTENTION: The bigger roof panel need to cover the smaller one. (1) Insert Part #M4 into the frame. (3) Place 4 Part #W between roof panels and solidifying bars. Then secure with 4 Bolts #12 and 4 Nuts #5; Place 1 Part #W between roof panels and Part #E2. Then secure with 1 Bolt #9 and 1 Nut #5. (2) Insert Part #M5 into the frame. (4) Place 6 Part #W between roof panels and beams. Then secure with 6 Bolts #10 and 6 Nuts #5; Place 1 Part #W between roof panels and Part #E2.
(1) Place Part #W between roof panels and Part #E2. Then secure with Bolt #11 and Nut #5. (2) Repeat the above procedures to assemble the other 3 sides.
(1) Place Part #K and Part #K1 on Part #E2; Put on Part #X2 and secure with Bolt #8. (2) Repeat the above procedures to assemble the other 3 sides.
(1) Place Part #K1 and Part #K on Part #E; Put on Part #X3 and secure with Self-tapping Screw #2. (2) Repeat the above procedures to assemble the other 3 corners.
(1) Attach roof panels to f inishing bars with 2 Self-tapping Screws #3. (2) Repeat the above procedures to assemble the other 3 sides.
How to Put the 112 Hooks into the Double-track Double-track 7 Hooks × 2 Rows 7 Hooks × 2 Rows 7 Hooks × 2 Rows 7 Hooks × 2 Rows 7 Hooks × 2 Rows 7 Hooks × 2 Rows 7 Hooks × 2 Rows 7 Hooks × 2 Rows
(1) Place 7 hooks on each slot of the Sidewall Track(C1&C). (2) Install Part #T1 at the joint of Part C&C1 with Bolt #8. Double-track (3) Repeat the above procedures to assemble other 3 sides.
Hang up Mosquito Sidewalls to Inside Track
Hang up Solid Sidewalls to Outside Track