Missing part? Damaged? Contact us via email at service@domioutdoorliving.com www.domioutdoorliving.com © Copyright 2022-2024 domi LLC. I All Rights Reserved.
！ Us ebol t st os ecur et hef r amet ot hegr oundt oagai ns tt hes t r ongwi nd.
Pole Beam Beam Beam Beam Beam Beam Corner Roof Bar Corner Roof Bar Connector Roof Bar Solidfying Bar Solidfying Bar Solidfying Bar Finishing Bar Finishing Bar Finishing Bar
Finishing Bar Finishing Bar Finishing Bar Finishing Bar Finishing Bar Finishing Bar Finishing Bar Finishing Bar Finishing Bar Finishing Bar Finishing Bar Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel
Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel
Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel Net Frame Net Frame Net Frame Net Frame Base Joint Cover Joint Cover Base Corner Solidifying Bar Corner Solidifying Bar Inside Roof Connector Bracket Bracket Union Bar Outside Roof Connector J-Hook
Bracket Hook Finishing End Mosquito Sidewall Plastic Bracket Bracket Spacer Joint Cover Bracket Finishing End Solid Sidewall (need to buy extra) Solid Sidewall (need to buy extra) Plastic Bracket Plastic Bracket Plastic Bracket Bracket Corner Cover Mosquito Sidewall Plastic Bracket
(1) Attach 2 Part #B1 to Part #A with 4 Bolts #8. (2) Attach 2 Part #B2 to Part #A with 4 Bolts #6. (3) Attach Part #B to Part #A with 3 Bolts #8. (4) Repeat the above procedures to assemble the other 3 Part #A.
(1) Attach 2 Part #B1 to Part #A1 with 4 Bolts #8. (2) Attach Part #B3 to Part #A1 with 4 Bolts #8. (3) Repeat the above procedures to assemble another Part #A1.
(1) Insert Part #C2 into Part #C1 and secure with 3 Bolts #8. (4) Insert Part #X into the beam and secure with 1 Bolt #8. (2) Insert the other side of Part #C2 into Part #C and secure with 3 Bolts #8. (3) Connect Part #C1 and Part #C through Part #C2. (5) Secure the bottom of Part #X and Part #C/C1 with 3 Bolts #8. (6) Repeat the above procedures to assemble the other Part #C and Part #C1.
(1) Insert Part #C2 into Part #D, and secure with 3 Bolts #8. (2) Insert the other side of Part #C2 into Part #D2 and secure with 3 Bolts #8. (4) Insert Part #X into the beam and secure with 1 Bolt #8. 20x (3) Connect Part #D and Part #D2 through Part #C2. (5) Secure the bottom of Part #X and Part #D/D2 with 3 Bolts #8. (6) Repeat the above procedures to assemble the other Part #D & #D2.
(1) Insert Part #C2 into Part #D2, and secure with 3 Bolts #8. (4) Insert Part #X into the beam and secure with 1 Bolt #8. (2) Insert the other side of Part #C2 into Part #D1 and secure with 3 Bolts #8. (3) Connect Part #D2 and Part #D1 through Part #C2. (5) Secure the bottom of Part #X and Part #D2/D1 with 3 Bolts #8. 11 (6) Repeat the above procedures to assemble the other Part #D2/#D1.
(1) Connect Part #C and #D to Part #A with 8 Bolts #4. (From Outside) (2) Repeat the above procedures to assemble the other 3 corners. Please don't tighten all bolts.
(1) Connect Part #C and #D to Part #A with 4 Bolts #8. (From Inside) Repeat the above procedures to assemble the other 3 corners. 13 Please don't tighten all bolts.
(1) Connect Part #A1 to the middle of Part #D2 with 5 Bolts #8. Repeat the above procedures to assemble the opposite side. 14 Please don't tighten all bolts.
(1) Affix Part #R and Part #R1 to the frame with 8 Bolts #8. Repeat the above procedures to assemble the other 3 corners. 15 Please don't tighten all bolts.
(1) Cover the corner with Part #X1. (2) Secure with 2 Self-tapping Screws #3. (from top to bottom) (3) Secure with 2 Self-tapping Screws #3. (from bottom to top) 16 Repeat the above procedures to assemble the other 3 corners. Tighten all bolts.
Assemble the 4 Corner Roof Bars: (1) Connect Part #E1 and Part #E with 2 Bolts #8 . (2) Attach Part #U to Part #E with Bolt #8 . 17 (3) Repeat the above procedures to assemble the other 3 corner roof bars.
Please have a freestanding ladder ready at the center of the gazebo. (1) Place 4 Part #E1 on the 4 corners of Part #S. Secure with 8 Bolts #8. (from bottom to top) ATTENTION: You can also finish this step on the ground and then lift 4 corner roof bars and inside roof connector to the top together. (Need 2 people and 2 ladders) Outside View Outside View 18 (2) Place 4 Part #E on 4 Part #A; secure with 8 Bolts #8.
(1) Attach Part #U1 to Part #E2 with Bolt #7 . 19 (2) Repeat the above procedures to assemble the other 5 roof bars.
(1) Attach Part #U4 to Part #E2 with Bolt #7 . 20 (2) Repeat the above procedures to assemble another roof bar.
(1) Place Part #E2 on part #S. Secure with Bolt #8 (from bottom to top). Outside View Inside View (2) Connect Part #E2 and Part A1 with part #U4. Secure with 2 Bolts #8. 21 (3) Repeat the above procedures to assemble the opposite side.
(1) Place Part #E2 on Part #S. Secure with Bolt #8 (from bottom to top). Outside View Inside View (2) Connect Part #E2 and the Assembled Beam (C&C1) with part #U1. Secure with 2 Bolts #8. 22 (3) Repeat the above procedures to assemble the opposite side.
(1) Place Part #E2 on Part #S. Secure with Bolts #8 (from bottom to top). Outside View Inside View (2) Connect Part #E2 and the Assembled Beam (D1&D2&D) with part #U1. Secure with 2 Bolts #8. 23 (3) Repeat the above procedures to assemble the opposite side.
Secure 5 Part #T to Part #S and Part #S1. (From bottom to top) ATTENTION: The holes of Part #S and Part #S1 need to be aligned, on the same vertical line.
U3 G1 U3 G1 U3 (1) Insert Part #U3 into Part #G1 (2) Insert 2 Part #U3 into Part #G1 and secure with Blot #8. and secure with 2 Blots #8. Inside View (3) Attach Part #G1 and Part #U3 to Part #E2 with Blot #7. (4) Attach Part #G1 and Part #U3 to Part #E2 with Bolt #7 and Blot #8. (5) Attach Part #G1 and Part #U3 to Part #E2 with Blot #7. Outside View 25 (6) Repeat the above procedures to assemble the opposite side.
Inside View (1) Attach Part #G and Part #U3 to Part #E2 with Bolt #8 Outside View 26 (2) Repeat the above procedures to assemble the opposite side.
(2) Attach 2 Part #F and Part #U3 to Part #E2 with Blot #7 and Blot #8.
Outside View (1) Insert Part #U2 into Part #F and Part #G. (2) Secure with 2 Bolts #8. (3) Secure them to Part #E with Bolt #8. 28 (4) Repeat the above procedures to assemble the other 3 sides.
(1) Connect Part #J1 and Part #Q1 with 1 Bolt #7 and 1 Nut #5. (2) Connect Part #J3 and Part #Q3 with 2 Bolts #7 and 2 Nuts #5. X2 (3) Connect Part #J3 and Part #Q3 with 2 Bolts #7 and 2 Nuts #5. (4) Connect Part #J2 and Part #Q2 with 1 Bolt #7 and 1 Nut #5. X2 29 (5) Repeat the above procedures to assemble the opposite side.
Inside View (1) Place the Assembled J1 & Q1, J2 & Q2 and J3 & Q3 on Part #E2, securing with 3 Bolts #8. 30 (2) Repeat the above procedures to assemble the opposite side.
(1) Connect Part #J and Part #Q with 2 Bolts #7 and 2 Nuts #5. X2 (2) Place the Assembled Part #J & #Q on Part #E2, securing with 1 Bolt #8. X2 Inside View 31 (3) Repeat the above procedures to assemble the opposite side.
(1) Place Part #J and Part #J1 on Part #E; put on Part #X3 and secure with Self-tapping Screw #2. Inside View (2) Repeat the above procedures to assemble the other 3 corners.
Cover Part #Z, #Z1 & #Z2 to Roof Panels.
Cover Part #Z, #Z3 & #Z4 to Roof Panels.
ATTENTION: The bigger roof panel need to cover the smaller one. (1) Insert Part #N1 and Part #N2 (2) Insert Part #N5 and Part #N4 into the frame; attach Part #H1 into the frame; attach Part #H2 to Part #E2, securing with Bolt #8. to Part #E, securing with Bolt #8. Please don't tighten all bolts. 35 (3) Repeat the above procedures to assemble the opposite side.
(1) Insert 4 Part #N3 into the frame. When installing Part #H1/H2 & Part #H3, you should unscrew the bolt that have not been tightened.
(1) Place Part #H1 and Part #H3 on Part #E2; put on Part #X2 and secure with Bolt #8. (2) Place 2 Part #H3 on Part #E2; put on Part #X2 and secure with Bolt #8. (3) Place Part #H3 and Part #H2 on Part #E2; put on Part #X2 and secure with Bolt #8. 37 (4) Repeat the above procedures to assemble the opposite side.
ATTENTION: The bigger roof panel need to cover the smaller one. (1) Insert Part #L1 and Part #L2 into the frame. (2) Insert Part #L4 and Part #L3 into the frame. (3) Attach Part #H to Part #E2, securing with Bolt #8. 38 (4) Repeat the above procedures to assemble the opposite side.
(1) Place Part #H and Part #H2 on Part #E1; put on Part #X3 and secure with Self-tapping Screw #2. Outside View (2) Repeat the above procedures to assemble the other 3 corners.
Cover Part #Z to Roof Panels X2 Section View X2 40
Cover Part #Z to Roof Panels X2 41 X2
Cover Part #Z to Roof Panels X2 X2 42
#9 #11 Part #W should be inserted between roof panels and solidifying bar or beams, then secure with bolts and nuts.
ATTENTION: The bigger roof panel need to cover the smaller one. (1) Insert Part #P1, Part #P2 and Part #P3 into the frame. (2) Insert Part #P12, Part #P11 and Part #P10 into the frame. (3) Place 4 Part #W between roof panels and solidifying bars. Then secure with 4 Bolts #12 and 4 Nuts #5. (4) Place 14 Part #W between roof panels and beams. Then secure with 14 Bolts #10 and 14 Nuts #5. 44 (5) Repeat the above procedures to assemble the opposite side.
ATTENTION: The bigger roof panel need to cover the smaller one. (1) Insert Part #P4 and Part #P5 into the frame. (2) Insert Part #P9 and Part #P8 into the frame. (3)Place 8 Part #W between roof panels and solidifying bars. Then secure with 8 Bolts #12 and 8 Nuts #5. (4) Place 12 Part #W between roof panels and beams. Then secure with 12 Bolts #10 and 12 Nuts #5. 45 (5) Repeat the above procedures to assemble the opposite side.
ATTENTION: The bigger roof panel need to cover the smaller one. (1) Insert Part #P6 into the frame. (3) Place 4 Part #W between roof panels and solidifying bars. Then secure with 4 Bolts #12 and 4 Nuts #5; Place 1 Part #W between roof panels and Part #E2. Then secure with 1 Bolt #9 and 1 Nut #5. (2) Insert Part #P7 into the frame. 46 (4) .Place 6 Part #W between roof panels and beams. Then secure with 6 Bolts #10 and 6 Nuts #5; Place 1 Part #W between roof panels and Part #E2.
ATTENTION: The bigger roof panel need to cover the smaller one. (1) Insert Part #M1 and Part #M2 into the frame. (2) Insert Part #M8 and Part #M7 into the frame. (3) Place 6 Part #W between roof panels and beams. Then secure with 6 Bolts #10 and 6 Nuts #5. 47 (4) Repeat the above procedures to assemble the opposite side.
ATTENTION: The bigger roof panel need to cover the smaller one. (1) Insert Part #M3 into the frame. (2) Insert Part #M6 into the frame. (3) Place 4 Part #W between roof panels and solidifying bars. Then secure with 4 Bolts #12 and 4 Nuts #5. (4) Place 6 Part #W between roof panels and beams. Then secure with 6 Bolts #10 and 6 Nuts #5. 48 (5) Repeat the above procedures to assemble the opposite side.
ATTENTION: The bigger roof panel need to cover the smaller one. (1) Insert Part #M4 and Part #M5 into the frame. (2) Place 4 Part #W between roof panels and solidifying bars. Then secure with 4 Bolts #12 and 4 Nuts #5; Place 1 Part #W between roof panels and Part #E2. Then secure with 1 Bolt #9 and 1 Nut #5. (3) Place 6 Part #W between roof panels and beams. Then secure with 6 Bolts #10 and 6 Nuts #5; Place 1 Part #W between roof panels and Part #E2. Then secure with 1 Bolt #9 and 1 Nut #5.
Place Part #W between roof panels and Part #E2. Then secure with Bolt #11 and Nut #5. Repeat the above procedures to assemble the other 3 sides.
(1) Place Part #K4 and Part #K5 on Part #E2; Put on Part #X2 and secure with Bolt #8. K5 K5 (2) Place Part #K2 on Part #K4 and Part #E2; Put on Part #X2 and secure with Bolt #8. 51 (3) Place Part #K3 on Part #K5 and Part #E2; Put on Part #X2 and secure with Bolt #8. (4) Repeat the above procedures to assemble the opposite side.
(1) Attach Part #K and Part #K1 to the frame; Put on Part #X2 and secure with Bolt #8. (2) Repeat the above procedures to assemble the opposite side.
(1) Place Part #K3 and Part #K on Part #E; Put on Part #X3 and secure with Self-tapping Screw #2. (2) Repeat the above procedures to assemble the other 3 corners.
8x (1) Attach roof panels to finishing bars with 4 Self-tapping Screws #3. (2) Repeat the above procedures to assemble the opposite side.
4x (1) Attach roof panels to finishing bars with 2 Self-tapping Screws #3. (2) Repeat the above procedures to assemble the opposite side.
How to Put the 152 Hooks into the Double-track 76 Hooks For Sidewall Package contains 76 hooks, another 76 Hooks For Curtains 76 hooks need to be purchased separately Double-track 7 Hooks × 2 Rows 7 Hooks × 2 Rows 10 Hooks × 2 Rows 7 Hooks × 2 Rows 7 Hooks × 2 Rows 7 Hooks × 2 Rows 10 Hooks × 2 Rows 7 Hooks × 2 Rows 7 Hooks × 2 Rows 7 Hooks × 2 Rows 56
(1) Place 7 hooks on each slot of the Sidewall Track(C1&C). (2) Install Part #T1 at the joint of Part C&C1 with Bolt #8. Double-track 57 (3) Repeat the above procedures to assemble the opposite side.
(1) Place 7 hooks on each slot of the Sidewall Track(D&D1). (2) Place 10 hooks on each slot of the Sidewall Track(D2). (3) Install Part #T1 at the middle of Part #D&D1&D2 with Bolt #8. Double-track 58 (4) Repeat the above procedures to assemble the opposite side.
Hang up Mosquito Sidewalls to Inside Track 59
Hang up Solid Sidewalls to Outside Track 60
Thanks for your purchase. At domi outdoor living, we believe in our products. That’s why we provide a 12-month warranty and friendly, casy-to-reach after-sales service. So if you have any questions about our product and assembly,please feel free to contact us. We will be here for you. Support: After-sales contact email: service@domioutdoorliving.com Please tell us your order ID when contact. Attach photos of damaged part for instant reply. © Copyright 2022-2024 domi LLC. I All Rights Reserved.
