User Manual

Creating Virtual Machine 86
Note: The Mouse Synchronization Tool increases performance of the guest OS/2 operating
system under Citrix.
Clipboard Synchronization Tool Installation
In OS/2 and eComStation you must launch the Clipboard Synchronization Tool manually. This
tool is not a tool itself but an ordinary application, and should be treated as such. If you want the
Clipboard Synchronization tool to start automatically when your guest operating system is
started:
 include the tool file PrlClip.exe into autostart group (startup.cmd file or another
file as it is done in your operating system).
The Clipboard Synchronization Tool is located in the ClipBrd\OS2 directory on the CD-ROM
containing Parallels Tools.
Sound Driver Installation
Note: Before installing the Sound Driver you should have multimedia support installed in OS/2
guest OS.
To install the Sound Driver:
1 Click the
System Setup icon on the system panel.
2 Select
Install/Remove line, and then select Multimedia Application Install.
3 In the
IBM Multimedia Presentation Manager/2 - Installation window choose CD-ROM drive,
then
Drivers\Sound\OS2 directory. Select the ALC Codec feature and click the Install button.
4 Restart the OS/2 guest operating system.
Network Driver Installation
Below we consider the installation of the Realtek RTL8029 driver inside the OS/2 Warp version
4.0.
1 Click the
System Setup icon on the system panel.
2 Click the
MPTS Network Adapters and Protocol Services icon to open the Multi-Protocol
Transport Services
window.
3 Click
Configure.
4 In the
Configure window that opens, click Configure again to open the Adapter and Protocol
Configuration
window.
5 Click the
Other adapters button below the Network Adapters section of the window to open
the
Copy Additional Network Adapter Drivers window.
6 Specify the path to the Parallels driver on CD-ROM disc image. The path should be:
<CD-ROM drive>\Drivers\Network\RTL8029\NDIS2OS2
7 Click
OK. The Parallels network adapter driver will be copied. After this you can see the
name
RTL8029 PCI Ethernet Adapter included in the Network Adapters list. Select this name.
8 Click
Change in the Network Adapters section of the window to change the current network
adapter into the selected one.