User`s guide

Managing Parallels Server Bare Metal Network 151
Saved parameters for Container 102
After completing these tasks, Container 101 and Container 102 will be able to access any of the
servers in the network where the eth0 physical adapter is connected.
At any time, you can disconnect the veth virtual network adapters of Container 101 and 102
from the vznetwork1 Virtual Network by executing the following commands:
 To disconnect the veth adapter of Container 101 from the Virtual Network:
# pctl set 101 --ifname eth1 --network "" --save
Saved parameters for Container 101
 To disconnect the veth adapter of Container 102 from the Virtual Network:
# pctl set 102 --ifname eth1 --network "" --save
Saved parameters for Container 102
Managing Adapters in Virtual
Machines
This section provides information on how you can manage virtual network adapters in your
virtual machine. You will learn to do the following:
 Create new virtual network adapters and delete existing ones.
 Configure the parameters of an existing virtual network adapter (e.g. assign an IP address to
it).
 Join virtual network adapters to Virtual Networks.
All these operations are described in the following subsections in detail.