User`s guide

Managing Parallels Server Bare Metal Network 141
Listing Virtual Networks
Sometimes, you may wish to list the Virtual Networks existing on the Parallels server. To do
this, you can use either the vznetcfg or prlsrvctl utility.
Listing Virtual Networks With vznetcfg
To list the Virtual Networks on your server using the vznetcfg utility, execute the following
command:
# vznetcfg net list
Network ID Status Master Interface Slave Interfaces
Shared active vnic0
Host-Only active vnic1
Bridged active eth0
vznetwork1 active vnic2
In the example above, 4 Virtual Networks - vznetwork1 and 3 default Virtual Networks -
exist on the Parallels server. The information on these Virtual Networks is presented in the table
having the following columns:
Column Name Description
Network ID
The ID assigned to the Virtual Network.
Status
Indicates the status of the Virtual Network. It can be one of the
following:
 active: the Virtual Network is up and running.
 configured: the information on the Virtual Network is present
in the /etc/vz/vznet.conf file on the server, but the bridge
to which the Virtual Network is bound is down or absent from the
server.
Note: Detailed information on the vznet.conf file is given
in the Parallels Command Line Reference Guide.
Master Interface
Displays the adapter on the server connected to the Virtual Network,
if any.
Slave Interfaces
Lists the adapters in virtual machines and Containers joined to the
Virtual Network, if any.
Listing Virtual Networks With prlsrvctl
You can also use the prlsrvctl utility to list the Virtual Networks existing on your server.
To do this, run the following command:
# prlsrvctl net list
Network ID Type Bound To
Shared shared vnic0
Host-Only host-only vnic1
Bridged bridged eth0
vznetwork1 host-only vnic2
This utility displays the following information on Virtual Networks:
Column Name Description