User`s guide

Installing Parallels Virtual Automation 16
In the above command, autoinstaller_file_name stands for the name of the
autoinstaller file.
4 In the Welcome to pva-setup window, click Configure to specify the Internet repository
information and the local download directory to which you want to upload the files.
After you have specified the necessary information, click OK and then Next to
proceed with the installation.
5 In the Choose installation type window, choose the installation type. By default, you
are offered to install
 PVA Agent for Virtuozzo and PVA Agent for Parallels Server components;
 PVA Power Panel component.
Note: Installing Power Panel component is optional, whereas installing both PVA
Agents is obligatory.
 SNMP component. This component can be installed on the physical server only
if the net-snmp >= 5.1.1-3 package is present on the server.
Click Next to start the installation. Keep in mind that, by default, the wizard will install
both the PVA Agents and PVA Power Panel components. If you want to deselect
PVA Power Panel or select the SNMP component, select Custom installation and
click Next. Pass on to the next step.
6 After you have selected Custom installation and clicked Next, you will see the Choose
components to install window displayed. Choose the component for the installation.
7 Click Next to start the installation.
For the instructions on how to install Parallels Virtual Automation from the installation
archive, refer to the Parallels Virtual Automation Installation Guide for Linux and Bare Metal.
Installing on Windows
You can install Parallels Virtual Automation components on your Windows-based
physical server using the autoinstaller. The autoinstaller scans the physical server and
offers to download and to install only those Parallels Virtual Automation components
that can be installed on this server. Thus, the autoinstaller saves the downloading time
and the disk space.
The installation procedure consists of the following steps:
1 Download the necessary autoinstaller from the Parallels official web-site
http://www.parallels.com/download/pva/to the physical server where you are going
to install Parallels Virtual Automation components.
2 Start the autoinstaller by double-clicking it.
3 In the Welcome window, click Configure Settings to specify the Internet repository
information and the local download directory to which you want to upload the
Parallels Virtual Automation installation files.
When the necessary information is specified, click Next to proceed with the
installation.