System information

43
Deploying Parallels Mac Client
5 Use the Boundaries tab page to specify Configuration Manager boundaries to search. You can
use this search option together with the options on the Subnets tab page, but searching
boundaries should be the primary method. If you haven't configured boundaries and boundary
groups yet, you need to configure them before using this option (p. 36).
The Bounda
ries tab page has the following elements:
• Boundary Groups to search list — Lists boundary groups. The groups displayed here are
the groups that are used for the current site assignment (the Use this boundary group for
site assignment option is selected in the boundary group Properties dialog). The groups
that are not associated with any site are included in the list too. Highlight the group to
display individual boundaries in the list below it. To search all boundaries in the group, select
the check-box in front of the group name.
• Boundaries to search list — Lists boundaries that belong to the highlighted boundary
group. Select the boundaries to search.
• Quick filter — Allows to specify a filter for the Boundaries to search lists. You can type
any part of the text that might appear in the boundary's name, type, or description.
6 Use the Subnets tab page to specify the subnets to search. You can search subnets if you
can't search boundaries (described above) for any reason. Select Search local subnets to
search local subnets. To search other subnets (in addition to or instead of the local subnets),
click the New icon and then in the New Subnet Assignment dialog, enter the Subnet and
Mask information. Make sure that the Enable subnet search check box is selected and then
click OK. Use the provided icons to Edit, Delete, and Enable/Disable a subnet scan.
7 On the Schedule tab, click the New icon to set a schedule for running discovery. The Custom
Schedule dialog opens:
• Set the start date and start time for a discovery run.
• Set the discovery duration. This setting specifies the maximum length of time for a discovery
run. If all resources are discovered before this time is up, the run will continue with minimal
network traffic until this time is up. If the run is not completed before this time is up, only the
resources already discovered will be included in the result.
• In the Recurrence pattern group box, select how this schedule will recur. The following
choices are available:
None: The scheduled run is a one-time-only event.
Weekly: The scheduled run will occur weekly at the same start time.
Monthly: The scheduled run will occur monthly at the same start time.
Custom Interval: The scheduled run will occur at a custom interval set by the administrator.
8 Click OK, and then click OK again.
Running Network Discovery
Network discovery runs on a schedule as specified in the discovery configuration (see above). A
discovery run will perform the following actions: