System information

132
Technical Reference
The following options are available for managing the subnets searched during a Network
Discovery run:
• New icon: Opens the New Subnet Properties dialog to add subnet information to the
discovery polling list and to initially enable the specific subnet search.
Note: Specifying a subnet does not guarantee that it will be searched, as this is influenced by the
number of router hops selected.
• Property icon: Opens the Subnet Properties dialog to view or modify subnet information for
a specific subnet from the discovery polling list.
• Delete icon: Removes the selected subnet from the discovery polling list.
• Enable/Disable icon: Enables or disables the selected subnet for discovery.
The following columns are displayed for each subnet in the discovery polling list:
• Subnet: Specifies a subnet number in IP format (for example: 131.24.10.0). This number
can contain wildcards.
• Mask: Specifies the subnet mask for the subnet number (for example, 255.255.255.0).
• Name: Specifies the subnet name.
• Search: Specifies whether the subnet will be searched the next time discovery runs.
Available options are Enabled and Disabled.
Search local subnets
Specifies whether subnets containing the server running discovery will be searched. This option
is disabled by default.
Parallels Network Discovery: Boundaries Tab
Use the Boundaries tab page to specify Configuration Manager boundaries to search during
network discovery. You can use this search option together with the options on the Subnets tab
page, or you can use either one. If you haven't configured boundaries and boundary groups yet,
you need to configure them before using this option (p. 36).
The Bounda
ries tab page has the following elements:
Boundary Groups to search list
Lists boundary groups. The groups displayed here are the groups that are used for the current
site assignment (the Use this boundary group for site assignment option is selected in the
boundary group Properties dialog). The groups that are not associated with any site are
included in the list too. Highlight the group to display individual boundaries in the list below it. To
search all boundaries in the group, select the check-box in front of the group name.
Boundaries to search list
Lists boundaries that belong to the highlighted boundary group. Select the boundaries to
search.
Quick filter