User`s guide

140
Advanced Topics
1 Start the virtual machine using the same bootable floppy image.
2 Insert the Windows 98 installation CD or connect an ISO image of the installation disc choosing
CD/DVD > Connect Image from the Devices menu.
3 If you created only one primary partition (disk C:), by default, your CD/DVD drive will have the
drive letter D:. Type the command:
D:\setup.exe
and press Return(Enter). The installation starts and the files are copied from the CD to the virtual
hard disk.
4 Follow the on-screen instructions of the Setup. Note that you can add or remove some options
later.
5 Read and accept the License Agreement. Enter the license key.
6 Confirm the default system directory or specify another one.
7 In the Setup options dialog choose the type of installation. Typical is recommended.
8 (only for Windows 98) If you are going to use networking, select the network card when
prompted.
9 Turn off the virtual machine.
10 Eject the installation CD or disconnect the ISO image.
11 Choose Configure from the Virtual Machine menu, go to Hardware > Boot Order, and select
the hard disk to be the first boot device. Click OK to save the configuration.
12 Restart the virtual machine. This time, it will boot from the hard disk.