User`s guide

Setting Up a Virtual Machine 108
3 In the IBM Multimedia Presentation Manager/2 - Installation window choose the CD/DVD
drive, then the <CD-ROM drive>\Drivers\Sound\OS2 directory. Select the ALC
Codec feature and click the Install button.
4 Restart the OS/2 guest operating system.
Network Driver Installation
To install Realtek RTL8029 driver inside the OS/2 Warp version 4.5:
1 Click the System Setup icon on the system panel.
2 Click the MPTS Network Adapters and Protocol Services icon to open the Multi-Protocol
Transport Services window.
3 Click Configure.
4 In the window that appears, click Configure again.
5 In the Adapter and Protocol Configuration window, click the Other adapters button below the
Network Adapters section.
6 In the Copy Additional Network Adapter Drivers window specify the path to the Parallels
driver on the CD disc image. The path will be like the one below:
<CD-ROM drive>\Drivers\Network\RTL8029\NDIS2OS2
7 Click OK. The Parallels network adapter driver will be copied. After this you can see the
name RTL8029 PCI Ethernet Adapter included in the Network Adapters list. Select this name.
8 Click Change in the Network Adapters section of the window to replace the current network
adapter by the selected one.
9 Click OK when the message "Are you sure you want to change this
network adapter?" is displayed. After you click OK, the RTL8029 PCI Ethernet Adapter
appears in the appropriate field of the Current Configuration section of the window. Now if
you click Edit in the Current Configuration section of the window, you will see that you do
not need to configure any properties for this driver, because it is self-configurable.
10 Click OK when finished.
11 Close both the Configure and Multi-Protocol Transport Services windows.
12 Click Exit in the Update CONFIG.SYS window.
13 Exit the configuration program and restart the guest OS.