Data Sheet

Program the Propeller Activity Board WX

over Wi-Fi with the DIP module, and see its

remote sensor data display on your computer

in real time. This is especially useful when

preparing for robot contests because your

ActivityBot can roam in a maze and transmit

sensor data to the SimpleIDE Terminal

without the USB tether. Reprogram it without

ever removing it from the maze!

Program your microcontroller to make TCP

client connections with web pages on the

Internet to get key pieces of information for

your project. Send messages to pages

hosted by services that can trigger emails,

Twitter feeds, and more.

Specifications

● Wi-Fi Protocols: 802.11 b/g/n

● Network Protocols: IPv4, TCP/HTTP

● Security: WPA/WPA2

● Encryption: WEP/TKIP/AES

● Wi-Fi range: 30 meters LOS

● Voltage requirement options:

○ +3.3 to +5 VDC supplied through the breadboard connection

○ +3.3 VDC supplied through the WX (2 x 10 x 2 mm) connection

● Logic levels:

○ SIP - output high (set by Vin voltage, either 3.3 or 5.0 V), low 0 V. Input high

>Vin/2, input low <Vin/2,

○ DIP - output high 3.3 V, low 0 V, input high > 1.5 V, input low < 1.5 V.

● Current requirements: Typical 75 mA, with Wi-Fi transmit peaks up to 360 mA

● Form factor:

○ SIP: 0.1” (2.54mm) spaced row of 10 right angle pins

○ DIP WX: 0.078” (2mm) spaced dual row of 10 straight pins

● PCB Dimensions: Approximately 1.0 x 1.5 in (26 x 37.5 mm)

● Operating temp range: +32 to +158 °F (0 to +70 °C)

ESP8266 Wi-Fi Module (#32420)

v1.0 05/12/2016 Page 3 of 12