Data Sheet

RB-Plx-293
Wide Angle PIR Motion Sensor
The Wide Angle PIR Sensor features a larger detection angle of 180˚. This makes it ideal in
applications where users need to track movements across a large, open area. The Wide Angle PIR
Sensor is a pyroelectric device, and it detects motion by sensing changes in the infrared levels emitted
by surrounding objects. When motion is detected, the Wide Angle PIR Sensor outputs a high signal on
its output pin.
Features
• Single bit output
• Small size and mounting holes for easy concealment
• On-board LEDs
• Power 3V to 6VDC operation 150uA idle, 3mA active(no load) current draw
• 30mA active(0 ohm resistor) high current draw
• Detects movement up to 30 ft away
• 180˚ detection angle for widespread motion detection
• Adjustable sensitivity to tune for different operating conditions
• User-selectable "night-time mode" for detecting motion in decreased lighting conditions
• 4-pin SIP package perfect for breadboard-friendly projects
Specifications
• Voltage requirements: 3.0 to 6.0 VDC
• Current requirements: 150 uA idle, 3 mA active (no load)
• Communication: Single-bit high/low output
• Dimensions: 1.42 x 1.42 x 0.79 in (36.0 x 36.0 x 20.2 mm)
• Operating temperature range: 32 to 122 °F (0 to 50 °C)
Applications
• Security Alarm
• Motion-activated nightlight
• Holiday animated props