Data Sheet

Vibration Motor, Vibrator Motor, Micro Motor, Coin & Pancake Motors , Pager Motors
6-4 Humidity exposure
Temperature: 40±2°C
Humidity: 90 ~ 95% RH
Exposure time: 96hrs
No condensation of moisture
6-5 Vibration
Displacement: 1.5mm (p-p)
Frequency: 10 ~ 55Hz
Acceleration: 22m/s2
Period: 20 Mins log sweep (10 ~ 55 ~ 10Hz)
Direction: x, y, z
Time: Every 2 hours
After the test motors shall
be approved as specified in
item 7-2.
6-6 Free fall
Test state: Set the motor to the approximately 75 g
(include the motor) weight of block drop the motor
on the concrete floor.
Height: 1.5 m
Direction: 6/6faces
Number of times: Twice each
After the test motors shall
be approved as specified in
item 7-2.
6-7 Heat shock
Test cycle: 20 cycles
After 2 hours exposure in ordinary temperature
and humidity, Motors shall be approved as
specified in
item 7-2.
7. Requirements
Items
Requirements
7-1 Table A
1) Rated speed: Initial data -30% Min, Initial data +60% Max
2) Rated current: ±30%/Initial data±30% max
3) Starting voltage: 2.0 V DC max
7-2 Table B
1) Rated speed: ±30%/Initial data±30% max
2) Rated current: ±30%/Initial data±30% max
3) Starting voltage: 2.0V DC max
8. Matters to be paid attention to when using motor
8-1 Please lay the motors carefully in transportation to avoid any serious damage to the motor body or its electric function
because of collision.
8-2 Please use and storage motors according to N0.2 item (Operating Conditions) in specification, or else motor
characteristics would be affected.
http://www.vibratormotor.com/vib/Z7AL2B1692082.html (5 of 6) [5/18/2009 4:59:21 PM]