User Guide

Key Specifications

● Voltage input requirements: 5 VDC, absolute maximum 5.5 VDC

● Input Current requirements:

○ Recommended minimum 100 mA

○ Maximum according to customer application

● VIO Power Supplies: 3.3 V up to 300 mA per 8 I/O pins; requires P2 Edge Module

● USB programming: Serial up to 2 MBaud; requires Prop Plug (#32201) programming

adapter

● Wireless programming: (up to 2 MBaud); requires P2 WX WiFi Adapter (#64007) and WX

WiFi SIP module (#32420S)

● Operating temperature: -40 to +185 °F (-40 to +85 °C)

● PCB Dimensions: 3.15 x 1.4 in (80 x 35.5 mm)

The P2 Edge Mini Breakout Board is compatible with a wide range of modules, adapters and

accessories. See the Propeller 2 page at www.parallax.com.

Orientation

When connecting your P2 Edge Module to the P2 Edge Mini Breakout Board, ensure that the

module is inserted with the P0 and P38 edge pads closest to the P0 and P38 labels which are

marked on the breakout PCB, either side of the Edge Socket. Correct module orientation is

shown in this image: