Education Shield

Step 4

Press firmly to insert the Board of Education Shield into the Arduino board’s sockets.

Standoff Assembly Options (additional hardware sold separately)

Tabletop standoffs are recommended to keep your board from tipping while you build circuits.

 (4) Parallax #700-00028 – Machine screw, 4-40 x 1/ 4” pan-head Phillips

 (4) Parallax #700-00060 – Standoff, threaded aluminum, round 4-40

 #1 Phillips point screwdriver

Thread a screw through each corner hole on the Board of Education Shield hole from the top side.

Thread an aluminum standoff onto each screw and tighten gently.

Note: the corner mounting holes are plated and connected to the Board of Education Shield’s ground

plane, and so will the aluminum standoffs when attached in this manner.

Press the BOE Shield

onto the Arduino