Crawler assembly manual

Step #7 Installing the Rubber Feet

Item Qty Description

(D) (6) Rubber Feet

Use Fig #15 as a guide to install the rubber feet.

Be careful not to bend the legs. Slide the rubber feet (D)

onto each Leg as shown in Fig #16. Double check your

work then proceed to Step #8.

Fig #15 Fig #16

Step #8 Preparing your Boe-Bot

Item Qty Description

(1) Your Boe-Bot

Use Fig #17 as a guide. To complete the Crawler Kit upgrade, some

simple changes must be made to your Boe-Bot. First, remove the

wheels and ball caster. Then, remove your Board of Education

project platform to prevent the chance of damaging it during the

installation, and save the screws for the final step. Next compare your

servo installation to Fig #17. If your servos are installed inside the

Boe-Bot chassis, they must be removed and reinstalled as shown.

Make sure the servo head is toward the middle of the chassis then

proceed to Step #9

Fig #17