BASIC stamp manual v2.2
3: Using the BASIC Stamp Editor
BASIC Stamp Syntax and Reference Manual 2.2 • www.parallax.com • Page 67
Under the Debug Port tab (Figure 3.26), each of the four (4) Debug
Terminal’s default COM port settings may be configured separately.
These settings are only used when the Debug Terminal is manually
opened.
Figure 3.26: The Debug Port Tab
under Edit Preferences.
You may assign a specific COM port from the available drop-down list;
this list can be changed by clicking on the (...) button to the right. Note
that any Debug Terminals that are opened automatically after a PBASIC
program is downloaded will always default to the COM port and settings
used during download. If NONE is selected as the COM port, the
manually opened Debug Terminal will not open any port upon startup, so
you will have to manually select the desired COM port from the Debug
Terminal window each and every time you open that Debug Terminal.
DEBUG PORT PREFERENCES.