BASIC stamp manual v2.2

Using the BASIC Stamp Editor
Page 66 • BASIC Stamp Syntax and Reference Manual 2.2 • www.parallax.com
Under the Debug Function tab (Figure 3.25), checkboxes allow enabling or
disabling of special processing for 16 different control characters. The
default is for all 16 control characters to be processed, but you may disable
one or more of them if you are using the Debug Terminal to view data
coming from a device other than a BASIC Stamp.
Figure 3.25: The Debug Function
Tab under Edit  Preferences.
For example, a device that sends out a 0 to indicate something other than
Clear Screen will cause unintentional clearing of the Receive pane;
unchecking the checkbox for “(0) = Clear Screen” will prevent this from
happening.
DEBUG FUNCTION PREFERENCES.