BASIC stamp manual v2.2

1: Introduction to the BASIC Stamp
BASIC Stamp Syntax and Reference Manual 2.2 • www.parallax.com • Page 11
Figure 1.3: BASIC Stamp 1
(Rev Dx) (Stock# 27100).
The BASIC Stamp 1 is available several physical packages. The BS1-IC
(Figure 1.1) uses surface mount components to fit in a small 14-pin SIP
package. The preassembled BASIC Stamp 1 OEM (Figure 1.2) features an
easier-to-trace layout meant to aid customers who wish to integrate the
BASIC Stamp 1 circuit directly into their design (as a lower-cost solution).
The BASIC Stamp 1 Rev. Dx (simply called the Rev. Dx), see Figure 1.3,
includes a prototyping area suitable for soldering electronic components.
These three packages are functionally equivalent, except that the Rev. Dx
does not have an available reset pin.
In addition to the packages shown, there are prototyping boards available
that feature a surface mounted BS1 and programming cable connector.
Please check www.parallax.com  Products  Development Boards for
product descriptions.