Board of education manual
Parallax, Inc. • BOE rev C (#28150) • Version 1.1 • 8/16/2004 Page 1 
599 Menlo Drive, Suite 100 
Rocklin, California 95765, USA 
Office: (916) 624-8333 
Fax: (916) 624-8003 
General: info@parallax.com 
Technical: support@parallax.com 
Web Site: www.parallax.com 
Board Of Education, Revision C (28150) 
Development / Education Platform for BASIC and Javelin Stamps 
The  Board  Of  Education  (BOE)  is  a  complete,  low-cost  development  platform  designed  for  those 
interested in learning and using Parallax's 24-pin BASIC Stamp or Javelin Stamp modules.   Its compact 
size, convenient features, and low price make it an ideal tool for the student and educator.  In fact, the 
BOE serves as the development platform for many of the Stamps In Class courses.  For those working 
on their own, the BOE is a great tool with which to get started with Parallax Stamp-ICs.  For educators, 
the BOE provides a clean, efficient platform to implementing your own Stamp-based curriculum. 
Features 
•  Wall-pack (2.1 mm center-positive plug) or 9-volt battery power supply connections 
(mechanically interlocked to prevent dual connection). 
•  Three-position power switch allows Stamp-IC programming without providing power to servo 
connectors. 
•  Jumper selection of servo power: regulated (Vdd) or unregulated (Vin). 
•  DB9 connector for Stamp-IC programming and serial communication during run-time. 
•  On-board regulator delivers up to 1 amp of power for larger projects. 
•  P0 - P15 I/O pins, Vdd, Vin, and Vss connections brought adjacent to 2" x 1 3/8" breadboard 
area. 
•  Female 10-pin dual row connector for optional AppMods. 
•  Includes set of ten (10) color-coded pluggable 22 gauge wires with tinned ends. 





