Datasheet

34/42 Doc ID 17116 Rev 3

7.7 REFERENCE/DATACAPTURE (25h)

7.8 OUT_TEMP (26h)

7.9 STATUS_REG (27h)

Table 37. REFERENCE register

Ref7 Ref6 Ref5 Ref4 Ref3 Ref2 Ref1 Ref0

Table 38. REFERENCE register description

Ref 7-Ref0 Reference value for Interrupt generation. Default value: 0

Table 39. OUT_TEMP register

Temp7 Temp6 Temp5 Temp4 Temp3 Temp2 Temp1 Temp0

Table 40. OUT_TEMP register description

Temp7-Temp0 Temperature data.

Table 41. STATUS_REG register

ZYXOR ZOR YOR XOR ZYXDA ZDA YDA XDA

Table 42. STATUS_REG description

ZYXOR

X, Y, Z -axis data overrun. Default value: 0

(0: no overrun has occurred; 1: new data has overwritten the previous one before it was

read)

ZOR

Z axis data overrun. Default value: 0

(0: no overrun has occurred; 1: a new data for the Z-axis has overwritten the previous one)

YOR

Y axis data overrun. Default value: 0

(0: no overrun has occurred; 1: a new data for the Y-axis has overwritten the previous one)

XOR

X axis data overrun. Default value: 0

(0: no overrun has occurred; 1: a new data for the X-axis has overwritten the previous one)

ZYXDA X, Y, Z -axis new data available. Default value: 0

(0: a new set of data is not yet available; 1: a new set of data is available)

ZDA Z axis new data available. Default value: 0

(0: a new data for the Z-axis is not yet available; 1: a new data for the Z-axis is available)

YDA Y axis new data available. Default value: 0

(0: a new data for the Y-axis is not yet available;1: a new data for the Y-axis is available)

XDA X axis new data available. Default value: 0

(0: a new data for the X-axis is not yet available; 1: a new data for the X-axis is available)