Datasheet

Mechanical and electrical characteristics L3G4200D
10/42 Doc ID 17116 Rev 3
2 Mechanical and electrical characteristics
2.1 Mechanical characteristics
Table 4. Mechanical characteristics @ Vdd = 3.0 V, T = 25 °C, unless otherwise noted
(1)
Symbol Parameter Test condition Min. Typ.
(2)
Max. Unit
FS Measurement range User-selectable
±250
dps±500
±2000
So Sensitivity
FS = 250 dps 8.75
mdps/digitFS = 500 dps 17.50
FS = 2000 dps 70
SoDr
Sensitivity change vs.
temperature
From -40 °C to +85 °C ±2 %
DVoff Digital zero-rate level
FS = 250 dps ±10
dpsFS = 500 dps ±15
FS = 2000 dps ±75
OffDr
Zero-rate level change
vs. temperature
(3)
FS = 250 dps ±0.03 dps/°C
FS = 2000 dps ±0.04 dps/°C
NL Non linearity
(4)
Best fit straight line 0.2 % FS
DST Self-test output change
FS = 250 dps 130
dpsFS = 500 dps 200
FS = 2000 dps 530
Rn Rate noise density BW = 50 Hz 0.03
dps/
sqrt(Hz)
ODR Digital output data rate
100/200/
400/800
Hz
Top
Operating temperature
range
-40 +85 °C
1. The product is factory calibrated at 3.0 V. The operational power supply range is specified in Table 5.
2. Typical specifications are not guaranteed.
3. Min/max values have been estimated based on the measurements of the current gyros in production.
4. Guaranteed by design.