PARAGON BATH SHOWER DOOR/ BATH TUB SCREEN INSTALLATION INSTRUCTIONS U2-11106bs ………………………………………………………………………………………… Please read these instructions carefully before installing. If you have any questions regarding installation, please call our technical support specialists Monday through Friday 9:00 AM – 5:00 PM at Phone: (888) 895-1989, or e-mail our technical support group at Support@Paragonbath.com. For more information on Paragon Bath Shower Doors & Tub screens please visit www.ParagonBath.
Installing Preparations 1. After opening the carton, please read the instructions carefully, examine boxes and packages for shipping damage. If the unit has been damaged, has a finishing defect, or has missing parts, please contact our customer support department within 3 business days of the delivery date. Please note that Paragon Bath will not replace any damaged products or missing parts free of charge after 3 business days or if the product has been installed.
Detailed Diagram of Shower/ Bath tub screen Components Component list No. Name Q’ty No.
05 Upper guide track 1pc 17 Philip’s head crew ST4*16 6pcs 06 Wall profile 2pcs 18 Philip’s head crew ST4*10 6pcs 07 Vertical profile-L 1pc 19 Screw cover 6pcs 08 Wall anchor 8pc 20 Moving glass 1pc 09 Sealing strip 1pc 21 Stationary glass 1pc 10 Vertical profile-R 2pcs 22 Handle 1pc 11 Glass fixed profile 2pcs 23 Towel bar 1pc 12 Bottom guide track 1pc 24 WARM TIPS 01: Open the packaging carefully and inspect all the necessary parts using detailed diagram and c
2. Check the guide tracks, your Guide tracks (05 &12) has been precut for your Shower model width:60”. If W-width of your wall-to-wall opening is equal to the size of your Shower model, it is unnecessary to cut the Guide tracks. If W-width of your wall-to-wall opening is less than the size of your shower model, you will need to cut the Guide tracks. You can choose to cut from any side you like. The length to cut off will be L=Subtract W from the size of your Shower Model.
Fig 3 4. Draw new holes on guide tracks, hole center to guide track edge should be “N” which have noted down before cutting.
5. Use 1/8” drill bit to drill new holes on the upper and bottom guide tracks. Please see Fig 5 for details Fig 5 6. Determine shower door location. 6.1. Put the Wall profile (06) to the wall above the shower base and level it vertically. Mark the drilling holes on the wall through the holes in the Wall profile. 6.2. Remove the wall profile, use electric drill with 1/4” drill bit to drill holes and use hammer to drive the Wall anchors (16) into the wall.
Fig 6 7. Assemble frames 7.1 Use Philip’s head screw ST4*40(15) to lock the upper guide track (05) and bottom guide tracks (12) to the vertical profiles-L (07) and vertical profile-R(10). Please see Fig 7 for details Fig 7 7.2 Snap wall profile (06) to the whole frame.
Fig 8 7.3. Place the complete unite of the frame to the two walls, use Philip’s head screw ST4*30 (16) to lock the frame to the walls throughout the holes on the vertical frame. 7.4. Use Philip’s head screw ST4*10 (18) to lock the wall profile and the vertical profile inside the shower space to make the whole frame strongly stable. Please see Fig 9 for details.
Fig 9 8. Install stationary glass 8.1. Install sealing strip (09) to the side which will insert the vertical profile of the stationary glass (21). Please see Fig 10 for details Fig 10 8.2. Place the stationary glass (21) vertically to the sloth between the upper and bottom guide tracks and push it into the vertical profile slowly.
Fig 11 8.3. Install glass fixed profile. 9.3.1 Rise the stationary glass a little bit and place the glass fixed profile(11) to the bottom of the glass, use Philip’s screw ST4*16 (17) to lock the profile to the bottom guide track. Place the other glass fixed profile (11) to the upper side of the glass and use Philip’s screw ST4*16 (17) to lock it to the upper guide track. Later cover all screw holes with screw cover (19).
Fig 12 9. Install moving glass (20) 10.1 Install rollers on upper and bottom of the moving glass (20). 10.2 Place the moving glass to the sloth of the guide tracks tipsily and then make it vertical slowly, let the rollers totally inside the guide track sloths. Later lock the roller screws and cover the screw holes with screw covers.
Fig 13 10. Install stop block Install stop block-L (13) to the upper guide track and the stop block-R (14) to the bottom guide track.
11. Install handles Please see Fig 15 for details Fig 15 12. Install strips Please see Fig 16 for details Fig 16 13.
14. Waterproof sealing Apply the sealant along the profiles and guide rails; on the seams between the bottom guide rail and the profiles as well as along the shower tub. Please see Fig 18 for details.
Product Maintenance To ensure long lasting life for your shower door/bath tub screen, please clean the dust or stains use non-abrasive sprays or cream based cleaners. Never use abrasive cleansers, metal brushes or scrapers that could scratch or dull the surface. To ensure a long lasting hardware finish, wipe off the metal parts after each use with a soft cloth. Do not use abrasive cleaners or cleaning products containing ammonia, bleach or acid.
WARANTY INFORMATION This is Paragon Bath LLC exclusive written warranty effective August 8, 2014 This warranty extends only to the original owner/end-user for household use only and is not transferable to a subsequent owner. This warranty applies only to Paragon Bath LLC products purchased from an authorized dealer and installed in United States or Canada. Proof of purchase (original sales receipt) must be provided with all warranty claims.
will Paragon Bath LLC be liable for costs of repair or replacement of any installation material, including but not limited to tiles, marble, contract, negligence, strict liability in tort, or warranty of any kind) for any indirect, special, incidental, consequential, or exemplary damages (including but not limited to lost profits). Paragon Bath LLC is not responsible for installation, removal or reinstallation costs of any product requiring warranty services.
Paragon Bath LLC is not responsible for product code compliance or for verifying building code restrictions on installation or use and any such compliance is excluded from this warranty. Paragon Bath LLC reserves the right to modify this warranty at any time - such warranty modification will not alter warranty applicable at the time of sale of the products in question. Product must be registered within 30 days from time of purchase at www.ParagonBath.com WARRANTY Paragon Bath LLC.
