Installation Guide

Fig 4
2.3. Install waterproof strip (04) and magnetic strip (03)
Please see Fig 5 for details
Fig 5
2.4. Place the stationary glass to the same level same line of the moving glass,
find the best sealing result of the two magnetic strips and then use 1/4” drill bit
to drill holes on the wall of stationary glass side, then knock the 1/4” wall
anchors(15) inside the holes. Use the Philip’s head countersunk
self-tapping screw ST4*30(11) to fix the stationary glass to the wall.
Please see Fig 6 for details
Warm tips:
In order to leave space to
install bottom fixed block,
better to shorten 15mm of the
sealing strip on the side
which close to the moving
glass.