Installation Guide

2. Install stationary glass
2.1. Install wall profile
Lay down the stationary glass to the ground (better to use some soft support
beneath), push the wall profile (01) to the glass slowly from one side to
another.
Please see Fig 3 for details
Fig 3
2.2. Install sealing strip
Install the sealing strip (05) to the bottom of the stationary glass.
Please see Fig 4 for details
Warm tips: Please pay attention to the
upper side and bottom side of the glass
before install the wall profile on it. Not to
upside down the glass. The side with
shelf holes on it is upper side, yet the side
without shelf holes is bottom side.