Installation Guide

Fig 1
Warm tips: In order to get convenient install, the waterproof strip may need to
cut according to the distance of the hinge groove on glass. See Fig 1
1.2. Move the glass away from the wall and use 5/16" drill bit to drill holes then
knock the 5/16" wall anchors (14) inside the holes. Later place the moving
glass back to the wall, the hinge holes should point directly to the holes which
have just been drilled. Use the Philip’s head countersunk self-tapping screw
ST5*40(10) to fix the hinge and the moving glass to the wall.
Please see Fig 2 for details:
Fig 2