Installation Guide

Fig 8

5. install decorative profile

Snap the top side of the decorative profile (02) to the bulge of the wall profile

and insert the decorative profile bottom side to the wall profile bottom grove

then knock the decorative profile gently to make it perfectly contact with the

wall profile.

Please see Fig 9 for details

Fig 9

6. Install glass shelf

6.1 Fix the glass shelf clamp A (19) to the stationary glass

6.2 Fix the glass shelf clamp B (20) to the wall. (in this way, it’s better to snap

the clamp B to the glass shelf first and push the glass shelf (21) to the clamp

A which have installed on stationary glass, then make the glass shelf touch to

the wall, adjust the level to get best result and pull the glass shelf out, then

draw holes on the wall for clamp B.)

6.3 Use 1/4” drill bit to drill holes on the wall and knock in the Φ1/4” anchors