Installation Guide

4. Install bottom fixed blocks

4.1 Place the threshold bar (07) to the base, put the bottom fixed block L (09)

on the left side of the threshold and put bottom fixed block R (08) on the right

side.

4.2 Draw holes on the base through the holes on bottom fixed blocks.

4.3 Use 1/4 inch drill bit to drill holes and knock in 1/4 inch anchors (15), then

use Philip’s head self-tapping screws ST4*16 (13) to lock bottom fixed

blocks and threshold to the base and cover the screw holes with screw covers

(18).

Please see Fig 8 for details