Installation Guide

Fig 4
4.Install guide rail
4.1. Loosen the screw on guide rail bracket (14), pull out the wall bracket.
Please see Fig 5 for details
Fig 5
4.2. Place the horizontal
position of the wall
bracket to the middle
between stationary glass
and moving glass. Vertical
position should be 5 1/4”
from the top of the
stationary glass to the
center of the wall bracket.
Draw positioning hole on the
Wall.
Please see Fig 6 for details
Fig 6
4.3. Drill holes with 1/4” drill bit and knock in 1/4” anchor(10), then use