PARAGON BATH SHOWER DOOR/ BATH TUB SCREEN INSTALLATION INSTRUCTIONS SBS03-L ………………………………………………………………………………………… Please read these instructions carefully before installing. If you have any questions regarding installation, please call our technical support specialists Monday through Friday 9:00 AM – 5:00 PM at Phone: (888) 895-1989, or e-mail our technical support group at Support@Paragonbath.com. For more information on Paragon Bath Shower Doors & Tub screens please visit www.ParagonBath.
Installing Preparations 1. After opening the carton, please read the instructions carefully, examine boxes and packages for shipping damage. If the unit has been damaged, has a finishing defect, or has missing parts, please contact our customer support department within 3 business days of the delivery date. Please note that Paragon Bath will not replace any damaged products or missing parts free of charge after 3 business days or if the product has been installed.
Detailed Diagram of Shower door/ Bath tub screen Components Component list No. Name Q’ty No.
08 Philip’s screw ST5*30 2pcs 20 Fix clamp-R 1pc 09 Philip’s screw ST5*40 2pcs 21 Fix clamp-L 1pc 10 Φ1/4” anchor 6pcs 22 Philip’s screw ST4*16 2pcs 11 Φ5/16” anchor 2pcs 23 Threshold 1pc 12 Door stopper 2pcs 24 Screw cover 2pcs WARM TIPS 01: Open the packaging carefully and inspect all the necessary parts using detailed diagram and component list in your manual as a reference.
2. Your Upper Guide rail tube (03) has been precut for your Shower model opening width:59” for shower width. If W-width of your wall-to-wall opening is equal to the size of your Shower model, it is unnecessary to cut the Upper Guide rail tube and you can continue to Step 3. If W-width of your wall-to-wall opening is less than the size of your Shower model, you will need to cut the Upper Guide rail tube from the end which is farther from the Glass brackets (06) holes.
Fig 3 3.5. Use 5/16” drill bit to drill holes on the wall and knock in the 5/16” wall anchors (11), then lock the stationary glass to the wall by Philip’s screw ST6*40(07).
Fig 4 4.Install guide rail 4.1. Loosen the screw on guide rail bracket (14), pull out the wall bracket. Please see Fig 5 for details Fig 5 4.2. Place the horizontal position of the wall bracket to the middle between stationary glass and moving glass. Vertical position should be 5 1/4” from the top of the stationary glass to the center of the wall bracket. Draw positioning hole on the Wall. Please see Fig 6 for details Fig 6 4.3.
Philip’s screw ST5*40(09) to lock the wall bracket to the wall. Please see Fig 7 for details Warm tips: The other wall bracket is installed in the same way Fig 7 4.3. Disassemble the glass bracket (06). Pull the two door stoppers (12) to the guide rail tube (03) and insert the bracket core inside the guide rail tube, push it slowly to make the hole on the core match the hole on the tube, then lock the bracket back side with hexagon spanner.
Fig 8 4.4 Insert the guide rail bracket (14) to the two sides of the guide rail, fixed the guide rail bracket to the wall bracket with hexagon spanner. Please see Fig 9 for details Warm tips: 1.Please make sure the concave face of the guide rail bracket (14) should face the inner side of the shower space. 2.the other side of the guide rail and guide rail bracket are installed in the same way. Fig 9 4.5.
Please see Fig 10 for details. Fig 10 5. Install moving glass 5.1. Install rollers (04) Please see Fig 11 for details.
5.2. Install guide block (15) to the shower base. Please see Fig 12 for details 01 01 02 02 03 03 04 Fig 12 5.3. Rise the moving glass to make rollers hang to the top guide rail and place the glass bottom side to the guide block slowly, adjust glass to vertical then lock the roller guard(05).
Please see Fig 13 for details Fig 13
6.Install Threshold(23). 6.1.Place the threshold(23) to the shower base, in same level of the bottom of stationary glass, then place fixed clamp-R(20) to the end of the threshold which close to the stationary glass, make sure the clamp groove to grip the stationary glass. place the fixed clamp-L(21) to the end of the threshold which close to the wall. 6.2 Draw holes on the base through the holes on fixed clamps. 6.
04 Fig 14 7.Install handle (18) Please see Fig 15 for details Fig 15 8.
Fig 16 9. Fix the door stopper (12). Push the door stopper (12) close to the wall side, slide the moving door to make roller contact to the stopper and get perfect space then lock the stopper bottom screw. Please see Fig 17 for details Warm tips: The other stopper is installed in the same way.
10. Apply the sealant on the seams between the bottom sealing strip and the the shower base, and also the seams between shower base and the ground.
Product Maintenance To ensure long lasting life for your shower door/bath tub screen, please clean the dust or stains use non-abrasive sprays or cream based cleaners. Never use abrasive cleansers, metal brushes or scrapers that could scratch or dull the surface. To ensure a long lasting hardware finish, wipe off the metal parts after each use with a soft cloth. Do not use abrasive cleaners or cleaning products containing ammonia, bleach or acid.
WARANTY INFORMATION This is Paragon Bath LLC exclusive written warranty effective August 8, 2014 This warranty extends only to the original owner/end-user for household use only and is not transferable to a subsequent owner. This warranty applies only to Paragon Bath LLC products purchased from an authorized dealer and installed in United States or Canada. Proof of purchase (original sales receipt) must be provided with all warranty claims.
will be covered only for the remaining period of the original warranty. In no event will Paragon Bath LLC be liable for costs of repair or replacement of any installation material, including but not limited to tiles, marble, contract, negligence, strict liability in tort, or warranty of any kind) for any indirect, special, incidental, consequential, or exemplary damages (including but not limited to lost profits).
Paragon Bath LLC is not responsible for product code compliance or for verifying building code restrictions on installation or use and any such compliance is excluded from this warranty. Paragon Bath LLC reserves the right to modify this warranty at any time - such warranty modification will not alter warranty applicable at the time of sale of the products in question. Product must be registered within 30 days from time of purchase at www.ParagonBath.com WARRANTY Paragon Bath LLC.
