Installation Guide

4.Determine shower door location.
4.1. Put the Wall profile (06) to the wall vertically and level it. mark the drilling
holes on the wall through the holes in the Wall profile.
4.2.Remove the wall profile, use electric drill with Φ1/4” drill bit to drill holes
and use hammer to drive the Wall anchors (16) into the wall.
Please see Fig 5 for details:
Fig 5
5.Assemble the upper guide track
push the pulley wheels(22) into inner track groove of upper guide track and
lock bump stoppers(26) to outer track groove.
Please see Fig 6 for details