Installation Guide

2. Check the guide track
Your Guide tracks (05&08) has been precut for your Shower model width:59”.
If W-width of your wall-to-wall opening is equal to the size of your Shower
model, it is unnecessary to cut the Guide tracks .If W-width of your
wall-to-wall opening is less than the size of your Shower model, you will
need to cut the Guide tracks.
For upper guide track to be cut:
You can choose to cut any side. The cutting length L=Subtract W from the size
of your Shower Model.
Please see Fig 2 for details:
Image 2
For bottom guide track to be cut:
Because the bottom guide track needs to install door buffer blocks(12), in
order to make easy installation for following steps, it’s better to cut the length
on both sides.cutting length should be: L=(Subtract W from the size of your
Shower Model)/2.
Please see Fig 3 for details